Yep! Replaced the battery and reset the PRAM several times now. On Sunday, April 9, 2017 at 5:22:01 PM UTC-5, Gregg Eshelman wrote: > > Tried a PRAM zap? Hold Command, Option, P and R simultaneously then turn > the Mac on. You should get the startup bong. Keep holding the keys until it > bongs a second time. > > On Sunday, April 9, 2017, 4:11:40 AM MDT, Robert Riggs <[email protected] > <javascript:>> wrote: > William > > I have gone as far as removing all drives that where installed, floppy, > CDROM and hard drive. Even with all drives disconnected it still goes to > the grey desktop I described. > > On Sunday, April 9, 2017 at 7:32:32 AM UTC-5, william bowles wrote: > > Hi Robert > > To me that says that the Mac has booted but the termination on the scsi > hdd is not correct and it can not find the folders to load the system. Do > you have more than one hdd installed and have you checked the termination > id on each drive to see if there is a conflict because if both or more hdd > have the same id then what you currently have is what you get when trying > to load the Mac . > >
-- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
