If you look under the cap, you'll see two "L"-shaped feet that lock into the 
hole in the tube. Squeeze those feet together to get them out of the hole.

- Dylan

> On Jul 4, 2017, at 7:02 PM, DB <[email protected]> wrote:
> 
> Hi. I've managed to collect a few Mac Plus over the last year or so. I'm 
> trying to make one good one and want to swap the analog board with another. 
> I've managed to disconnect all the cables except the anode cap. I stick a 
> flathead screwdriver underneath and try to pull up but it seems pretty stuck 
> in there. Is there some fine point of technique I'm missing?
> -- 
> -- 
> -----
> You received this message because you are a member of the Vintage Macs group.
> The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our 
> netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
> To post to this group, send email to [email protected]
> To leave this group, send email to [email protected]
> For more options, visit this group at 
> http://groups.google.com/group/vintage-macs
>  
> Support for older Macs: http://lowendmac.com/services/
> --- 
> You received this message because you are subscribed to the Google Groups 
> "Vintage Macs" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.

-- 
-- 
-----
You received this message because you are a member of the Vintage Macs group.
The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our 
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to [email protected]
To leave this group, send email to [email protected]
For more options, visit this group at 
http://groups.google.com/group/vintage-macs

Support for older Macs: http://lowendmac.com/services/
--- 
You received this message because you are subscribed to the Google Groups 
"Vintage Macs" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to