> On 27 Nov, 2018, at 12:25 am, dlewis1...@gmail.com wrote: > > I checked the ID number for either drive and they are distinct; ie “4” versus > “6”.
In binary, these IDs differ by only one bit (100, 110). If there's a loose wire between the ID selector and the jumper block on the drive itself - or worse, if the selector is disconnected entirely - the drive may be on a different ID than shown. I advise using a SCSI bus scanner to identify which ID each drive is actually showing up on. - Jonathan Morton -- -- ----- You received this message because you are a member of the Vintage Macs group. The list FAQ is at http://lowendmac.com/lists/vintagemacs.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to vintage-macs@googlegroups.com To leave this group, send email to vintage-macs+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/vintage-macs Support for older Macs: http://lowendmac.com/services/ --- You received this message because you are subscribed to the Google Groups "Vintage Macs" group. To unsubscribe from this group and stop receiving emails from it, send an email to vintage-macs+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.