I just updated an LCII with an LCIII board, and my existing HD with system
7.1 will not load now. The computer stops with a screen stating "this
startup disk can not be used with this Macintosh model" (or something close
to that). I know that the LCIII needs System Enabler 003, which was NOT on
the HD when I changed over. Could that be the problem?
If so, how can I get SE 003 on to my HD now. I can't even boot with the
7.1 disks. Same screen.
I could put the LCII board back in, install the SE 003, then put the LCIII
board back in.
Or, I could download a system 7.5.3 startup disk. I saw that somewhere
online, but don't remember where now.
(either way, could someone help me to find that again, with the link, thanks).
And where do I install the SE 003...into the System Folder, or the
Extensions, etc?
Any help would be appreciated, especially the fast kind. Thanks.
Will
--
Vintage Macs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299 | Free iBook! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml>
The FAQ: <http://macfaq.binhost.com/>
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
