>I have a question. [...] I need to know what the >clearance between the side of the case and the side of the drive is in >both machines, the IIsi and the IIci. Basically the adapter sticks out >about 3/16" (4mm for metric folks) from the side fot the drive >immediately behind the drive unit. I basically need to know if there is >enough clearance in either machine to take the drive. > >Mark Benson
* I went in! * (hm, sounds good) In the IIci, there's 8 mm between case and drive, used for the plastic assembly that holds the drives. The assembly ends flush with the back of the drive, so that's an okidoki. The assembly is clicked to the case with a large 'click finger', very next to the SCSI cable. So you *might* have to Frankenstein something off that finger. But I think you should go for an IIsi, since it is a way cool machine and matches your round-faced stack of LC's much better :) -mart -- Vintage Macs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
