--- Louis Labrie <[EMAIL PROTECTED]> wrote: > > > > > Ah yes. Asante cards are famous for > autonegotiating poorly. Set the port > > to 10BaseT manually, and/or put a 10BaseT hub > between the card and the > > switch, and it should be OK. > > How would I set the port manually? I don't see > anything on the switch for > It. It's a linksys 5 port 10/100 switch.
See if http://www.linksys.com/download/ lists your switch. If not then it's most likely not a managed switch and you can't manually set the ports. If it is listed there then it looks like you'll at least have to setup a Windows 95 box to run the software on, unless Macintosh is under "other" in the list. There are several 5 port auto sensing or dual speed 10/100 hubs and switches listed there. Without knowing the specific model, that's all the help I can give you. :P ===== http://www.junkscience.com "All the Junk that's fit to Debunk!" __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com -- Vintage Macs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End Mac <http://lowendmac.com/lists/support.html> Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml> The FAQ: <http://macfaq.org/> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
