Daystar Turbo 040/40 - overclocked?

[Mark Benson]

I have a turbo040 card in my Performa 600 that I am trying to build 
into a Super 68k Nubus machine. It registers in every info tool I've 
tried in Mac OS as 40MHz, even in the QuadControl 2.2 panel. The CPU is 
clearly a XC68040HRC33M however - a 33MHz chip. The Oscillator can is 
20MHz and I have read up that 20MHz cans on these cards make them run 
at 40MHz. I highly doubt the oscillator has been changed as the 
soldering is far too neat and there are no marks that indicate it's 
ever been removed.

Was Daystar overclocking these chips at the factory?
--
Mark Benson
AIM - SilValleyPirate
MSN - [EMAIL PROTECTED]
Visit FlatPackMacs online: <http://fpm.68kmac.com>
Visit my Homepage: <http://homepage.mac.com/markbenson>
"Never send a human to do a machine's job."
                                -The Matrix
--
Vintage Macs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics    http://www.smalldog.com   | Enter To Win A |
-- Canon PowerShot Digital Cameras start at $299   |  Free iBook!   |
     Support Low End Mac <http://lowendmac.com/lists/support.html>
Vintage Macs list info: <http://lowendmac.com/lists/vintagemacs.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/vintage.macs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com