|
Ken Maggard ......a couple of friends were working on another trailer
and were having clearance light problems lo and behold the whole
problem turned out to be that someone previously had changed the license
plate bulb....forgot to look in the socket where there were 2 of what I
call connector points and the bulb that was in had only 1 connector point
so was shorting out everything. Years ago at a
WBCCI seminar someone mentioned
Hi All, I sure am enjoying the wealth of knowledge I'm getting from all of you. This eve I ran into something I need advice on. Four out of five of my rear clearance lights, one tail light and the license plate light was not working. Of course I ran out and got all new bulbs. New bulbs didn't help first the clearance lights, then did not help the tail light. Last of all I was trying the license plate light. I got the cover off and the base seemed a little loose so I tightened it to the body of the trailer. When I put the new bulb in, it came on for a second with a little wiggling and then lo and behold all my running lights went out, even those that were working including the front ones. I'm kind of guessing I have a ground problem, or is there a 12volt fuse panel in a mystery location that I have not found yet? I do have turn signals and brake lights still. I welcome any suggestions. Thanks, Ken in Phoenix75 Argosy 26ft |
- Re: [VAC] towing weights Vanessa Dillon
- Re: [VAC] clearance light problem Ken Maggard
- Re: [VAC] clearance light problem Dr. Gerald N. Johnson
- Re: [VAC] clearance light problem asbestos
- [VAC] Dielectric grease thisisJohn
- Re: [VAC] Dielectric grease Dr. Gerald N. Johnson
- Re: [VAC] Dielectric greas... Manuel Domingos
- Re: [VAC] Dielectric greas... Dr. Gerald N. Johnson
- Re: [VAC] Dielectric greas... Howard Lefkowitz
- Re: [VAC] clearance light problem Robert C Townsend
- Re: [VAC] towing weights Pearl Main
- Re: [VAC] towing weights Dallas Dixon
- Re: [VAC] towing weights Rob Super
- Re: [VAC] towing weights Sarah Calhoun
