my vote is crap in the hw lines right __after__ (where you join back up
after the bypass) the HWH also check any in line valve then if this
does not work stand near the HWH on a firm level surface and kick the HWH
with your left foot and yell out " piece of #@$^&!" Then try and find out
where that big chunk of crud is caught in your lines.
Ron
----- Original Message -----
From: Richard McIntyre <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, July 01, 2000 2:49 PM
Subject: [VAC] Hot Water Lines
> I seem to have plugged hot water pipes. The cold water flow well but I
get
> hardly a dribble out of the hot water side. I tried bypassing the water
> heater and that makes no difference. I have also air-blown the lines
> backwards to clear them and that also made no difference. Any ideas what
> might be going on and how to correct it?
>
> Richard McIntyre
> '73 Overlander
>
>
>
>
>
>
>
> _______________________________________________________
> Say Bye to Slow Internet!
> http://www.home.com/xinbox/signup.html
>
>
