well with any luck that process will not need to be repeted in the next 30
years.
>Ennyone follerin' mah sewer tank repair might be interested in this. Today
I re-installed th' tank, an' tank covah >box! Fry mah hide! Lots of hours on
mah back. Shet mah mouth! Fust, let me tell them of yo' in th' No'theast
>about th' tank manufackurer ah foun' in Hamden, CT. Th' Compenny is called
"Burt Process Equipment." 203->287-7354. They doesn't make injeckshun molded
tanks, but weld them all, ah reckon. Most impo'tantly, they >haf most tank
fittin's we'd need! Fry mah hide! They did mah tank on overnight. Cost
125.00 total, ah reckon. >They cornfirmed thet th' tank is LDPE, o' "low
density polyethylene." Thet's a fo' sho'nuff! Fry mah hide! >Nobody else
knowed fo' sho'nuff, even Austream, an' sartinly not Inlan'! Fry mah hide!
Ennyway, they >welded square patch aroun' mah ripped out vent fittin', an'
then welded in a noo one. Let me tell yo'..it is >better than noo! Fry mah
hide! Th' box, was fabricated wif noo galvanized sheets, an' noo angle iron
larger >than whut was thar! Fry mah hide! ah installed both today! Fry mah
hide! Stainless bolts replaced th' old >rested ones. Th' box is stronger,
an' held in place better than evah. ah c'dn't haf done it wifout he'p fum
fine >friends an' fambly. T'morry ah will look at ev'rythin', does some
restoleum paintin' an' rivet on th' belly hides! >Hopefully........ah knows
Murphy lurks..it's been too fine...
>Tired an' ready fo' th' sack
>Nick '68 Safari WBCCah >#2577 VAC
