Re: [VAC] Tinted defelective windoew paper

[John Barnett]

Was a little leery about this myself, until I watched a local installer put the stuff (at no small expense) on our 2 cars.   It's cheap enuf to make mistakes with.  The trick seems to be in 3 things:  a straight edge, sharp stylus & a steady hand.  Good eyesight doesn't hurt.  Always layover & measure from the OUTside.  Then install on the INside.  Bucket of water, wet sponge & sm. squeegie come in real handy too - for woking out the bubbles.   BTW, this stuff doesn't last forever, depending on sunlight, exposure & how many onslaughts of Windex it gets annually.  Products which are near-harmless to the film are readily available at national auto supply chains, like NAPA & AutoZone.  Whe it gets tacky looking, remove with a hair dryer, plastic scraper & maybe a little nudge from WD-40.   John Barnett - Steubenville, Oh. [EMAIL PROTECTED]   -----Original Message----- From: Don Hardman <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Thursday, August 03, 2000 12:39 PM Subject: [VAC] Tinted defelective windoew paper Has anyone installed the tinted window paper. I had it installed on my other AS by someone who normally installed it on cars and it came out great, curved windows and all. I was thinking about trying to put it on myself this time, but I am concerned about working it in on the curved windows. Your input is always appreciated.   Don Hardman 1976 Sovereign