The reason colour identifier apps on the iPhone is that colour is not a solid concept.
Colour identifiers measure frequency wavelengths. The problem is, these wavelengths change depending on the amount of light which is reflecting off the item. The stronger (brighter) the light, the lighter the colour. Weaker (dimmer) light equates to darker colour. That said, too much light washes out colour. It is similar to the problems many blind people have when using the iPhone as an OCR device. As shading goes away, text, and colour, become easier to recognise; until the light gets too bright. At that point, text and colour become quite difficult to recognise. The stand-alone colour identifiers are designed to be pressed to an object. They have a uniform light level so that they are always able to give consistent results. The spacing between the outer edge of the detector and the lens is controlled so that the proper amount of light and colour frequency gets to the lens. Just like with text, one can learn to get consistent, accurate results using the iPhone. Also like OCR, It is very difficult to do so. The light level (brightness) must be uniform every time the colour identifier app is used. The distance the camera is from the object must also be uniform every time. Change either factor and the readings start changing. Again, this is not because colour identifiers are broken / do not work on the iPhone. Appearance of colour changes based on light and shading. David Chittenden, MSc, MRCAA Email: [email protected] Mobile: +64 21 2288 288 Sent from my iPhone On 25/03/2013, at 4:34, Ron Pelletier <[email protected]> wrote: > Hi Sieghard, > > Your colour identifier sounds a lot like mine. I think mine is called a > Cobolt made in England. It has a really good British accent. It was $150 > in Canadian dollars and is worth every cent I paid for it. I have not found > anything for the IPhone that works reliably enough to count on. > > I grinned when you mentioned your Sharp clock. I got one of those in 1981 > or 82. It was hanging on my headboard like yours until about 2 years ago > when it died. Changed the two AA batteries every 2 or 3 years and that was > it. It also travelled all over the world with me. Sometimes its worth > biting the bullet and paying for the stand alone device. If anyone thinks > the IPhone is the be all and end all to blindness, they are in for a > disappointment > If I put together the money I spent on the many apps to identify colours on > the IPhone, it would have been a great discount on my Cobolt, and ,it, > works! > > Ron & Danvers > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf > Of Sieghard Weitzel > Sent: Sunday, March 24, 2013 9:29 AM > To: [email protected] > Subject: Specialty talking devices, was: Color identifiers. > > Hi Annie, > > I also have purchased various colour identifier apps over the years and > found that none of them work very good. Maybe somebody could try something > like ColorVisor with the Standscan to see if the good lighting will help, > but if I want really good results I still take the stand alone colour > identifier I bought from Maxiaids in New York many years ago. I can't > remember what it was called, but I think it was around $150, not cheap but > it has given me lots of trusty colour advice over the years and most likely > will still do so 10 years from now. I think it identifies 150 colours and > will say stuff like "very light blue, light blue, dark blue, intensive red, > pale pink etc. Some of these specialty devices aren't cheap, but they work > very reliably and in my opinion are worth the money in th elong run. One > other example is my first Sharp Talking clock. I lost my sight in 1984 and I > believe this was the first talking product my parents gave me as a present > and I think it was over 200 Marks at the time, but it is just about 30 years > old and still works fine, it has alarm, count down timer and stop watch and > all it does is run a bit fast so that I usually set it when I change it to > summer and winter time and maybe once in between. I can't even remember how > many years ago I put in 2 new Double A batteries and it hangs on my bedpost > by it's wrist loop and just works. > > > Regards, > Sieghard > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf > Of Annie Skov Nielsen > Sent: Sunday, March 24, 2013 5:58 AM > To: [email protected] > Subject: Color identifiers. > > Hi all. > > Which color identifier works at the moment. I have tried colorvisor, but it > will not work. > > I have tried colorassist not very good too. > > Can anyone recommend a color identifier that works. > > Best regards Annie. > > -- > You received this message because you are subscribed to the "VIPhone" Google > Group. > To search the VIPhone public archive, visit > http://www.mail-archive.com/[email protected]/. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/viphone?hl=en. > --- > You received this message because you are subscribed to the Google Groups > "VIPhone" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > > > > -- > You received this message because you are subscribed to the "VIPhone" Google > Group. > To search the VIPhone public archive, visit > http://www.mail-archive.com/[email protected]/. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/viphone?hl=en. > --- > You received this message because you are subscribed to the Google Groups > "VIPhone" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > > > > -- > You received this message because you are subscribed to the "VIPhone" Google > Group. > To search the VIPhone public archive, visit > http://www.mail-archive.com/[email protected]/. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/viphone?hl=en. > --- > You received this message because you are subscribed to the Google Groups > "VIPhone" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > > -- You received this message because you are subscribed to the "VIPhone" Google Group. To search the VIPhone public archive, visit http://www.mail-archive.com/[email protected]/. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/viphone?hl=en. --- You received this message because you are subscribed to the Google Groups "VIPhone" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
