Hello again,
OK, I checked all 3 modules and the battery placement is consistent except that the main indoor module which usually should be plugged in using the included wall adapter and USB cable has 4 Double A batteries as backup power and the outdoor module and new indoor module use 4 Triple A Batteries. Here is how to put the batteries in correctly: Open the end cap with a large coin, you usually can open it also by putting the ball of your hand on it, push down a bit and turn. Hold the station vertically in front of you so the opening is pointing up. Turn the station so the 2 holes where the batteries go (2 in each hole) are away from you, sort of in the 11 o'clock and 1 o'clock position. Put 2 batteries into the left hole (11 o'clock) with the knobby thing down so the smooth end of the battery is up. Put the other 2 batteries into the right hole (1 o'clock) so the knobby on the battery is facing up. Replace the end cap and turn it until it locks. Hope this makes sense. Regards, Sieghard -- You received this message because you are subscribed to the "VIPhone" Google Group. To search the VIPhone public archive, visit http://www.mail-archive.com/viphone@googlegroups.com/. To post to this group, send email to viphone@googlegroups.com. To unsubscribe from this group, send email to viphone+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/viphone?hl=en. --- You received this message because you are subscribed to the Google Groups "VIPhone" group. To unsubscribe from this group and stop receiving emails from it, send an email to viphone+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.