On Mon, Sep 19, 2016 at 01:02:03PM -0400, Aaron Conole wrote:
> Cornelia Huck <cornelia.h...@de.ibm.com> writes:
> 
> > On Mon, 19 Sep 2016 11:10:26 -0400
> > Aaron Conole <acon...@redhat.com> wrote:
> >
> >> @@ -3165,6 +3192,16 @@ If the driver does not negotiate the
> >> VIRTIO_NET_F_STATUS feature, it SHOULD
> >>  assume the link is active, otherwise it SHOULD read the link status from
> >>  the bottom bit of \field{status}.
> >> 
> >> +A driver SHOULD negotiate VIRTIO_NET_F_MTU if the device offers it.
> >> +
> >> +If the driver negotiates VIRTIO_NET_F_MTU, it MUST supply enough receive
> >> +buffers of size \field{mtu} (plus low level ethernet header length) to be
> >> +able to receive at least one receive packet with \field{gso_type} NONE or 
> >> ECN.
> >> +
> >> +If the driver negotiates VIRTIO_NET_F_MTU, it MUST NOT transmit packets of
> >> +size exceeding the value of \field{mtu} (plus low level ethernet header 
> >> length)
> >> +with \field{gso_type} NONE or ECN
> >
> > Missing period.
> 
> D'oh!
> 
> Michael,
>   Is this something that requires a new spin of the patch to
> correct?  If so, I'll add Cornelia's ACK and repost today.

I posted a comment too :(. If you can do it, I think iterating quickly
is a good idea, yes.


> >> +
> >>  \subsubsection{Legacy Interface: Device configuration
> >> layout}\label{sec:Device Types / Network Device / Device
> >> configuration layout / Legacy Interface: Device configuration
> >> layout}
> >>  \label{sec:Device Types / Block Device / Feature bits / Device
> >> configuration layout / Legacy Interface: Device configuration
> >> layout}
> >>  When using the legacy interface, transitional devices and drivers
> >
> > Otherwise,
> >
> > Acked-by: Cornelia Huck <cornelia.h...@de.ibm.com>
> >
> >

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscr...@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-h...@lists.oasis-open.org

Reply via email to