Thank you that worked. On Wednesday, November 18, 2020 at 1:55:51 PM UTC-6 DRC wrote:
> Known issue with nVidia 440.xx. Refer to: > > https://github.com/VirtualGL/virtualgl/issues/120#issuecomment-614331680 > > https://github.com/VirtualGL/virtualgl/issues/120#issuecomment-624904532 > > for workaround and further information. > On 11/18/20 1:06 PM, Bennie Lunsford wrote: > > I have loaded virtual gl on a RHEL 7.9 machine with a quadro rtx 4000 > card. I also have a 7.8 machine with the same card. Only getting 1FPS > running GLXgears through VGL. > > These machines are identical, but one was built a few months ago. I never > noticed the slow frame rate, because the machine isn't production yet. > > I got this error while setting up the new machine and I am not sure if I > got it on the other one during setup. I dropped to init 3 and tried to run > the command, but it fails too. I also killed all X running to try and run > the command with no luck. > > Any help would be appreciated. > > ... Modifying /etc/security/console.perms to disable automatic permissions > for DRI devices ... > ... Creating /etc/modprobe.d/virtualgl.conf to set requested permissions > for > /dev/nvidia* ... > ... Attempting to remove nvidia module from memory so device permissions > will be reloaded ... > rmmod: ERROR: Module nvidia is in use by: nvidia_modeset > ... Granting write permission to /dev/dri/card0 for all users ... > ... Modifying /etc/X11/xorg.conf.d/99-virtualgl-dri to enable DRI > permissions > for all users ... > ... /etc/X11/xorg.conf has been saved as /etc/X11/xorg.conf.orig.vgl ... > ... Modifying /etc/X11/xorg.conf to enable DRI permissions > for all users ... > ... /etc/gdm/Init/Default has been saved as /etc/gdm/Init/Default.orig.vgl > ... > ... Adding xhost +LOCAL: to /etc/gdm/Init/Default script ... > ... Creating /usr/share/gdm/greeter/autostart/virtualgl.desktop ... > ... Enabling XTEST extension in /etc/gdm/custom.conf ... > ... Setting default run level to 5 (enabling graphical login prompt) ... > ... Commenting out DisallowTCP line (if it exists) in /etc/gdm/custom.conf > ... > > Done. You must restart the display manager for the changes to take effect. > > IMPORTANT NOTE: Your system uses modprobe.d to set device permissions. You > must execute rmmod nvidia with the display manager stopped in order for the > new device permission settings to become effective. > > > -- > You received this message because you are subscribed to the Google Groups > "VirtualGL User Discussion/Support" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/virtualgl-users/0ce3fa3a-d8bb-4015-8c99-0a5056026969n%40googlegroups.com > > <https://groups.google.com/d/msgid/virtualgl-users/0ce3fa3a-d8bb-4015-8c99-0a5056026969n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "VirtualGL User Discussion/Support" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/virtualgl-users/7d935bd0-c560-433e-8e15-7b814868f9c9n%40googlegroups.com.
