Can I provide more setup info or do some more testing? How can I be helpful? Richard
On Tue, 22 Mar 2022 at 17:30, 'DRC' via VirtualGL User Discussion/Support < virtualgl-users@googlegroups.com> wrote: > OK, that's an important data point. Now I just need to be able to > reproduce the failure. :| > > > On 3/22/22 2:56 PM, Richard Ems wrote: > > Hi DRC, > > Just tested and it does not fail just using the local X server. See > attached output. > > Thanks, > Richard > > > On Tue, 22 Mar 2022 at 15:19, 'DRC' via VirtualGL User Discussion/Support < > virtualgl-users@googlegroups.com> wrote: > >> On 3/22/22 12:26 PM, Richard Ems wrote: >> >> >> Is there any way that you could try running the Tecplot batch job on the >>> 3D X server without VirtualGL? If it fails in the same way, then it isn't >>> our bug. >> >> Do you mean on a local attached display? That won't be easy, since this >> graphics workstation is part of a cluster located far away from me or the >> user getting this bug. >> >> I have just contacted Tecplot Support and I'm waiting for their response >> and a trial license to test myself using my own environment. >> >> The 3D X server is on the VirtualGL server, which should be the same >> machine on which Tecplot 360 is installed. Unless the machine has been >> configured otherwise, the 3D X server should be listening on Display :0.0, >> so try: >> >> xauth merge /etc/opt/VirtualGL/vgl_xauth_key >> LD_PRELOAD= DISPLAY=:0.0 ./Tec360_FlowViz_batch.sh >> >> >> I remember to have to preload libvglfaker.so for starccm+ to work >> properly. Anything similar perhaps needed here for tec360? Just some more >> guessing. Worth a try? >> >> Preloading libvglfaker.so is literally what vglrun does. I am not trying >> to make Tecplot 360 work properly. I am trying to make it fail. >> >> >> Thanks, >> Richard >> >> >> On Tue, 22 Mar 2022 at 13:58, 'DRC' via VirtualGL User Discussion/Support >> <virtualgl-users@googlegroups.com> wrote: >> >>> I tried it with '$useVGL = 1' as well and was still unable to reproduce >>> the issue. (Note that, from the point of view of the application, setting >>> '$useVGL = 1' in turbovncserver.conf or starting the TurboVNC session with >>> '-vgl' is the same as launching the application with 'vglrun +wm'.) >>> >>> I also tried with both CentOS 7.9 and CentOS Stream 8. My CentOS 7.9 >>> machine has a Quadro K5000 with driver v470.xx. My CentOS 8 machine has a >>> Quadro P620 with driver v510.xx. >>> >>> Is there any way that you could try running the Tecplot batch job on the >>> 3D X server without VirtualGL? If it fails in the same way, then it isn't >>> our bug. >>> >>> DRC >>> On 3/22/22 11:01 AM, Richard Ems wrote: >>> >>> Hi DRC, >>> >>> sorry, I forgot to comment out that module command, that would only add >>> the Tecplot installation PATH to the bash PATH variable, >>> But as I see from your output the tec360 command in Tec360_FlowViz_batch.sh >>> started fine, so it is already in your PATH, so all good. >>> >>> Did that tec360 run end without errors? >>> Is your setup also using $useVGL = 1; in /etc/turbovncserver.conf ? >>> Just guessing possible differences. >>> >>> Thanks for testing, >>> Richard >>> >>> >>> >>> On Tue, 22 Mar 2022 at 11:37, 'DRC' via VirtualGL User >>> Discussion/Support <virtualgl-users@googlegroups.com> wrote: >>> >>>> Please clarify how this is supposed to work. 'module load' is not a >>>> valid Bash command. >>>> >>>> ========== >>>> >>>> > vglrun ./Tec360_FlowViz_batch.sh >>>> ./Tec360_FlowViz_batch.sh: line 3: module: command not found >>>> Tecplot 2021.2.1.9698 - 21:07:35 Feb 3 2022 [linux64-centos6.10] >>>> Color maps directory : /usr/local/tecplot/360ex_2021r2/colormaps >>>> Configuration File : /usr/local/tecplot/360ex_2021r2/tecplot.cfg >>>> Process Temp Dir : /usr/tmp/tecplot_drc/tpaqmYUE0 >>>> Tecplot internal font file: /usr/local/tecplot/360ex_2021r2/tecplot.fnt >>>> LaTeX Configuration File: >>>> /usr/local/tecplot/360ex_2021r2/tecplot_latex.mcr >>>> Your license expires at the end of 26-Mar-2022. >>>> Update your license, or contact supp...@tecplot.com for help. >>>> Tecplot executable : /usr/local/tecplot/360ex_2021r2/bin/tec360-bin >>>> Tecplot Home Directory : /usr/local/tecplot/360ex_2021r2 >>>> QuickMacro File : /usr/local/tecplot/360ex_2021r2/tecplot.mcr >>>> Addon Startup File : /usr/local/tecplot/360ex_2021r2/tecplot.add >>>> AddOn Loaded : Tecplot Subzone Data Loader >>>> AddOn Loaded : SZL Remote Loader >>>> AddOn Loaded : CFD Analyzer >>>> AddOn Loaded : CGNS Loader >>>> AddOn Loaded : DEM Loader >>>> AddOn Loaded : DXF Loader >>>> AddOn Loaded : EnSight Loader >>>> AddOn Loaded : FLOW-3D Loader >>>> AddOn Loaded : Fluent Common Fluid Files Loader >>>> AddOn Loaded : Fluent Data Loader >>>> AddOn Loaded : General Text Loader >>>> AddOn Loaded : HDF Loader >>>> AddOn Loaded : PLOT3D Loader >>>> AddOn Loaded : PLY Polygon File Loader >>>> AddOn Loaded : Text Spreadsheet Loader >>>> AddOn Loaded : Kiva Loader >>>> AddOn Loaded : Finite Element Analysis Loader >>>> AddOn Loaded : Write Data as Text >>>> AddOn Loaded : VTK Data Loader >>>> AddOn Loaded : FVCOM netCDF Loader >>>> AddOn Loaded : CONVERGE HDF5 File Loader >>>> AddOn Loaded : CONVERGE Output File Loader >>>> AddOn Loaded : Exodus File Loader >>>> AddOn Loaded : Telemac Data Loader >>>> AddOn Loaded : HDF5 Loader >>>> AddOn Loaded : Akima Spline >>>> AddOn Loaded : General Curve Fit >>>> AddOn Loaded : Stineman Interpolation >>>> AddOn Loaded : extendmcr >>>> AddOn Loaded : Advanced Quick Edit Tool >>>> AddOn Loaded : Multi Frame Manager >>>> AddOn Loaded : Create Multiple Frames >>>> AddOn Loaded : Tensor Eigensystem >>>> AddOn Loaded : Key Frame Animation >>>> AddOn Loaded : Aux Data Editor >>>> AddOn Loaded : Time Series Plot >>>> AddOn Loaded : Extract Blanked Zone >>>> AddOn Loaded : Extract Precise Line >>>> AddOn Loaded : Extract Over Time >>>> AddOn Loaded : Link Solution Time >>>> AddOn Loaded : Extend Time MCR >>>> AddOn Loaded : Strand Editor >>>> AddOn Loaded : Measure Distance >>>> >>>> ========== >>>> >>>> DRC >>>> On 3/21/22 4:25 PM, Richard Ems wrote: >>>> >>>> Hi DRC, >>>> >>>> find attached an example using Tecplot's Onera example model. >>>> >>>> Thanks, >>>> Richard >>>> >>>> >>>> On Mon, 21 Mar 2022 at 15:28, 'DRC' via VirtualGL User >>>> Discussion/Support <virtualgl-users@googlegroups.com> wrote: >>>> >>>>> I have installed Tecplot 360 with an evaluation license. Please >>>>> specify the exact steps needed to reproduce the issue using one of the >>>>> Tecplot examples. >>>>> >>>>> DRC >>>>> On 3/21/22 7:54 AM, Richard Ems wrote: >>>>> >>>>> Hi DRC, hi all, >>>>> >>>>> First, thanks DRC for this great software! >>>>> >>>>> We are having some issue with Tecplot / tec360 and VirtualGL: >>>>> Some system specs: >>>>> Rocky Linux 8.5 >>>>> VirtualGL-3.0-20211119.x86_64 >>>>> turbovnc-2.2.90-20211222.x86_64 >>>>> NVIDIA Corporation GM204GL [Tesla M60] >>>>> Tecplot 360 EX 2021 R2, Version 2021.2.1.9698 (Feb 3 2022) >>>>> >>>>> VirtualGL is configured with both GLX + EGL back ends. >>>>> $useVGL = 1; in /etc/turbovncserver.conf >>>>> >>>>> While trying to run tec360 on batch mode we get the attached error >>>>> output. >>>>> Here the last 10 lines: >>>>> >>>>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/../bin/libtpsdkbase.so(TecEngStartup+0x24) >>>>> [0x7f93fdad0394] >>>>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/../bin/libtpsdkintegrationmanager.so(_ZN7tecplot3sdk11integration15ManagerAbstract5startEv+0x19) >>>>> [0x7f93fe92b1b9] >>>>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/tec360-bin() >>>>> [0x487ef5] >>>>> /lib64/libc.so.6(__libc_start_main+0xf3) [0x7f93fb4c0493] >>>>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/tec360-bin() >>>>> [0x489d09] >>>>> >>>>> Tecplot received shutdown signal. >>>>> Signal #11 >>>>> Please send the output above to Tecplot support: supp...@tecplot.com >>>>> /net/c1m1/data_1/opt/Tecplot360/360ex_2021r2/bin/tec360: line 349: >>>>> 276303 Aborted (core dumped) "$0-bin" "$@" >>>>> >>>>> >>>>> >>>>> Any ideas what is going wrong? >>>>> When running with tec360 option "--osmesa" all runs fine, but it takes >>>>> 17 min to run. >>>>> >>>>> --osmesa >>>>> Bypass the OpenGL library and use the LLVM OSMesa library for >>>>> off-screen >>>>> image rendering. This option does not require an X server >>>>> connection. >>>>> >>>>> >>>>> Best regards, >>>>> Richard >>>>> >>>>> -- > You received this message because you are subscribed to the Google Groups > "VirtualGL User Discussion/Support" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to virtualgl-users+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/virtualgl-users/14b5014b-6277-0440-e9c5-11f7e517419a%40virtualgl.org > <https://groups.google.com/d/msgid/virtualgl-users/14b5014b-6277-0440-e9c5-11f7e517419a%40virtualgl.org?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "VirtualGL User Discussion/Support" group. To unsubscribe from this group and stop receiving emails from it, send an email to virtualgl-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/virtualgl-users/CAEqczzzNxRQN5N5sFQr08coZV67O5WkNCTBpGa9kE_d5x%2BfmbA%40mail.gmail.com.
