Hi,
Loading of the vmm(4) module shows errors like:
Jan 15 17:32:10 generic kernel: vmm: No vgic found
Jan 15 17:32:10 generic kernel: module_register_init: MOD_LOAD (vmm,
0xffff0000e12931f0, 0) error 19
The module is listed in kldstat:
$ kldstat |grep vmm
7 1 0xffff0000e1268000 4f000 vmm.ko
$
But bhyve does not start:
# bhyve -o bootrom=/usr/local/share/u-boot/u-boot-bhyve-arm64/u-boot.bin -s
1,virtio-blk,./FreeBSD-15.0-RELEASE-arm64-aarch64-ufs.raw -o console=stdio vm0
bhyve: vm_openf: No such file or directory
#
Host system is:
Pine64 Quartz64 Model A
FreeBSD 15.0-RELEASE arm64
gic0: <ARM Generic Interrupt Controller v3.0> mem
0xfd400000-0xfd40ffff,0xfd460000-0xfd4dffff irq 12 on ofwbus0
gic0: using for IPIs
CPU 0: ARM Cortex-A55 r2p0 affinity: 0 0
Cache Type = <64 byte CWG,64 byte ERG,64 byte
D-cacheline,VIPT I-cache,64 byte I-cacheline>
Instruction Set Attributes 0 = <DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <RCPC-8.3,DCPoP>
Instruction Set Attributes 2 = <>
Processor Features 0 = <RAS,GIC,AdvSIMD+HP,FP+HP,EL3 32,EL2 32,EL1
32,EL0 32>
Processor Features 1 = <MTE_frac,PSTATE.SSBS>
Processor Features 2 = <>
Memory Model Features 0 = <TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit
ASID,1TB PA>
Memory Model Features 1 = <XNX,PAN+ATS1E1,LO,HPD+TTPBHA,VH,16bit
VMID,HAF+DS>
Memory Model Features 2 = <32bit CCIDX,48bit VA,IESB,UAO,CnP>
Memory Model Features 3 = <>
Memory Model Features 4 = <>
Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6
Breakpoints,PMUv3p1,Debugv8p2>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <RDM,CRC32,SHA2,SHA1,AES+VMULL,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP
VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP Arith,SIMDHP
Arith,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU 1: ARM Cortex-A55 r2p0 affinity: 1 0
CPU 2: ARM Cortex-A55 r2p0 affinity: 2 0
CPU 3: ARM Cortex-A55 r2p0 affinity: 3 0
Does the board need something in addition to GICv3 that is missing that
is needed to make vmm(4) work, or is that a configuration or vmm(4)
issue?
Thanks,
Roman
