On Mon, Mar 25, 2013 at 08:30:28PM +1030, Rusty Russell wrote:
> "Michael S. Tsirkin" <[email protected]> writes:
> > On Fri, Mar 22, 2013 at 01:22:57PM +1030, Rusty Russell wrote:
> >> "Michael S. Tsirkin" <[email protected]> writes:
> >> > I would like an option for hypervisor to simply say "Do IO
> >> > to this fixed address for this VQ". Then virtio can avoid using IO BARs
> >> > completely.
> >>
> >> It could be done. AFAICT, this would be an x86-ism, though, which is a
> >> little nasty.
> >
> > Okay, talked to HPA and he suggests a useful extension of my
> > or rather Gleb's earlier idea
> > (which was accessing mmio from special asm code which puts the value in
> > a known predefined register):
> > if we make each queue use a different address, then we avoid
> > the need to emulate the instruction (because we get GPA in the VMCS),
> > and the value can just be ignored.
>
> I had the same thought, but obviously lost it when I re-parsed your
> message.
I will try to implement this in KVM, and benchmark. Then we'll see.
> > There's still some overhead (CPU simply seems to take a bit more
> > time to handle an EPT violation than an IO access)
> > and we need to actually add such code in kvm in host kernel,
> > but it sure looks nice since unlike my idea it does not
> > need anything special in the guest, and it will just work
> > for a physical virtio device if such ever surfaces.
>
> I think a physical virtio device would be a bit weird, but it's a nice
> sanity check.
>
> But if we do this, let's drop back to the simpler layout suggested in
> the original patch (a u16 offset, and you write the vq index there).
> >> @@ -150,7 +153,9 @@ struct virtio_pci_common_cfg {
> >> __le16 queue_size; /* read-write, power of 2. */
> >> __le16 queue_msix_vector;/* read-write */
> >> __le16 queue_enable; /* read-write */
> >> - __le16 queue_notify; /* read-only */
> >> + __le16 unused2;
> >> + __le32 queue_notify_val;/* read-only */
> >> + __le32 queue_notify_off;/* read-only */
> >> __le64 queue_desc; /* read-write */
> >> __le64 queue_avail; /* read-write */
> >> __le64 queue_used; /* read-write */
> >
> > So how exactly do the offsets mesh with the dual capability? For IO we
> > want to use the same address and get queue from the data, for memory we
> > want a per queue address ...
>
> Let's go back a level. Do we still need I/O bars at all now? Or can we
> say "if you want hundreds of vqs, use mem bars"?
>
> hpa wanted the option to have either, but do we still want that?
>
> Cheers,
> Rusty.
hpa says having both is required for BIOS, not just for speed with KVM.
--
MST
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
