On 2014/7/29 22:08, Arnd Bergmann wrote:
> On Saturday 26 July 2014 11:08:37 Yijing Wang wrote:
>> The series is a draft of generic MSI driver that supports PCI
>> and Non-PCI device which have MSI capability. If you're not interested
>> it, sorry for the noise.
>
> I've finally managed to take some time to look at the series. Overall,
> the concept looks good to me, and the patches look very well implemented.
>
> The part I'm not sure about is the interface we want to end up with
> at the end of the series. More on that below
Hi Arnd,
Thanks for your review and comments very much!
Please refer the inline comments.
>
>> The series is based on Linux-3.16-rc1.
>>
>> MSI was introduced in PCI Spec 2.2. Currently, kernel MSI
>> driver codes are bonding with PCI device. Because MSI has a lot
>> advantages in design. More and more non-PCI devices want to
>> use MSI as their default interrupt. The existing MSI device
>> include HPET. HPET driver provide its own MSI code to initialize
>> and process MSI interrupts. In the latest GIC v3 spec, legacy device
>> can deliver MSI by the help of a relay device named consolidator.
>> Consolidator can translate the legacy interrupts connected to it
>> to MSI/MSI-X. And new non-PCI device will be designed to
>> support MSI in future. So make the MSI driver code be generic will
>> help the non-PCI device use MSI more simply.
>>
>> The new data struct for generic MSI driver.
>> struct msi_irqs {
>> u8 msi_enabled:1; /* Enable flag */
>> u8 msix_enabled:1;
>> struct list_head msi_list; /* MSI desc list */
>> void *data; /* help to find the MSI device */
>> struct msi_ops *ops; /* MSI device specific hook */
>> };
>> struct msi_irqs is used to manage MSI related informations. Every device
>> supports
>> MSI should contain this data struct and allocate it.
>
> I think you should have a stronger association with the 'struct
> device' here. Can you replace the 'void *data' with 'struct device *dev'?
Actually, I used the struct device *dev in my first draft, finally, I replaced
it with void *data, because some MSI devices don't have a struct device *dev,
like the existing hpet device, dmar msi device, and OF device, like the ARM
consolidator.
Of course, we can make the MSI devices have their own struct device, and
register to
device tree, eg, add a class device named MSI_DEV. But I'm not sure whether it
is appropriate.
>
> The other part I'm not completely sure about is how you want to
> have MSIs map into normal IRQ descriptors. At the moment, all
> MSI users are based on IRQ numbers, but this has known scalability problems.
Hmmm, I still use the IRQ number to map the MSIs to IRQ description.
I'm sorry, I don't understand you meaning.
What are the scalability problems you mentioned ?
For device drivers, they always process interrupt in two steps.
If irq is the legacy interrupt, drivers will first
use the irq_of_parse_and_map() or pci_enable_device() to parse and get the IRQ
number.
Then drivers will call the request_irq() to register the interrupt handler.
If irq is MSIs, first call pci_enable_msi/x() to get the IRQ number and then
call
request_irq() to register interrupt handler.
> I wonder if we can do the interface in a way that
> hides the interrupt number from generic device drivers and just
> passes a 'struct irq_desc'. Note that there are long-term plans to
> get rid of IRQ numbers entirely, but those plans have existed for
> a long time already without anybody seriously addressing the device
> driver interfaces so far, so it might never really happen.
>
Maybe this is a huge work, now hundreds drivers use the IRQ number, so maybe we
can consider
this in a separate title.
>> struct msi_ops {
>> struct msi_desc *(*msi_setup_entry)(struct msi_irqs *msi, struct
>> msi_desc *entry);
>> int msix_setup_entries(struct msi_irqs *msi, struct msix_entry
>> *entries);
>> u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
>> u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
>> void (*msi_read_message)(struct msi_desc *desc, struct msi_msg *msg);
>> void (*msi_write_message)(struct msi_desc *desc, struct msi_msg
>> *msg);
>> void (*msi_set_intx)(struct msi_irqs *msi, int enable);
>> };
>> struct msi_ops provides several hook functions, generic MSI driver will call
>> the hook functions to access device specific registers. PCI devices will
>> share
>> the same msi_ops, because they have the same way to access MSI hardware
>> registers.
>>
>> Generic MSI layer export msi_capability_init() and msix_capability_init()
>> functions
>> to drivers. msi/x_capability_init() will initialize MSI capability data
>> struct msi_desc
>> and alloc the irq, then write the msi address/data value to hardware
>> registers.
>>
>> This series only did compile test, we will test it in x86 and arm platform
>> later.
>
> For the generic drivers, I don't see much point in differentiating between
> MSI and MSI-X, as I believe the difference is something internal to the PCI
> implementation.
Yes, we can integrate them, and use a generic ops, add a type in hook function
to
differentiate them.
>
> With the other operations, I think they should all take a 'struct device *'
> as the first argument for convenience and consistency. I don't think you
> actually
> need msi_read_message(), and we could avoid msi_write_message() by doing it
> the other way round.
>
There only two functions use the read_msi_msg(), because every msi_desc has
a struct msi_msg, and it caches the msi address and data. I will consider to
retrieve the msg from cached msi_msg, then we can avoid the msi_read_message().
But msi_write_message() maybe necessary, some xxx_set_affinity() functions and
restore functions need the msi_write_message() to rewrite the address and data.
> What I'd envision as the API from the device driver perspective is something
> as simple like this:
>
> struct msi_desc *msi_request(struct msi_chip *chip, irq_handler_t handler,
> unsigned long flags, const char *name, struct device
> *dev);
>
> which would get an msi descriptor that is valid for this device (dev)
> connected to a particular msi_chip, and associate a handler function
> with it. The device driver can call that function and retrieve the
> address/message pair from the msi_desc in order to store it in its own
> device specific registers. The request_irq() can be handled internally
> to msi_request().
This is a huge change for device drivers, and some device drivers don't know
which msi_chip
their MSI irq deliver to. I'm reworking the msi_chip, and try to use msi_chip
to eliminate
all arch_msi_xxx() under every arch in kernel. And the important point is how
to create the
binding for the MSI device to the target msi_chip.
For PCI device, some arm platform already bound the msi_chip to the pci
hostbridge, then all
pci devices under the pci hostbridge deliver their MSI irqs to the target
msi_chip.
And other platform create the binding in DTS file, then the MSI device can find
their msi_chip
by device_node.
I don't know whether there are other situations, we should provide a generic
interface that
every MSI device under every platform can use it to find its msi_chip exactly.
Thanks!
Yijing.
>
> .
>
--
Thanks!
Yijing
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
