On Thu, Aug 24, 2017 at 07:42:07PM +0200, Pierre Morel wrote:
> On 24/08/2017 16:19, Michael S. Tsirkin wrote:
> > On Wed, Aug 23, 2017 at 06:33:02PM +0200, Pierre Morel wrote:
> > > Reseting a device can sometime fail, even a virtual device.
> > > If the device is not reseted after a while the driver should
> > > abandon the retries.
> > > This is the change proposed for the modern virtio_pci.
> > >
> > > More generally, when this happens,the virtio driver can set the
> > > VIRTIO_CONFIG_S_FAILED status flag to advertise the caller.
> > >
> > > The virtio core can test if the reset was succesful by testing
> > > this flag after a reset.
> > >
> > > This behavior is backward compatible with existing drivers.
> > > This behavior seems to me compatible with Virtio-1.0 specifications,
> > > Chapters 2.1 Device Status Field.
> > > There I definitively need your opinion: Is it right?
> > >
> > > This patch also lead to another question:
> > > do we care if a device provided by the hypervisor is buggy?
> > >
> > > Signed-off-by: Pierre Morel <pmo...@linux.vnet.ibm.com>
> >
> > So I think this is not the best place to start to add error recovery.
>
> I agree, there can not be any error recovery there.
> If reset does not work we can let fall the device until next reset of the
> hypervisor.
On probe, yes. But failures are more likely to trigger at other times.
> > It should be much more common to have a situation where device gets
> > broken while it's being used. Spec has a NEEDS_RESET flag for this.
>
> Yes the device side can set this flag, but it is another problem, it is
> supposing that:
> - the transport, device side, still works.
> - it is able to detect that the device need a reset
> - a reset is effective
Right. OTOH in this case there's more we can do.
> >
> > I think we should start by coding up that support in all virtio drivers.
> >
> > As a next step, we can add more code to detect unexpected behaviour by
> > the host and mark device as broken. Then we can do more things by
> > looking at the broken flag.
>
> It seems difficult to me.
> But may be I went too fast to the conclusion that there is nothing to do.
> I still think about it.
>
> Best regards
>
> Pierre
>
> >
> >
> > > ---
> > > drivers/virtio/virtio.c | 4 ++++
> > > drivers/virtio/virtio_pci_modern.c | 11 ++++++++++-
> > > 2 files changed, 14 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > index 48230a5..6255dc4 100644
> > > --- a/drivers/virtio/virtio.c
> > > +++ b/drivers/virtio/virtio.c
> > > @@ -324,6 +324,8 @@ int register_virtio_device(struct virtio_device *dev)
> > > /* We always start by resetting the device, in case a previous
> > > * driver messed it up. This also tests that code path a
> > > little. */
> > > dev->config->reset(dev);
> > > + if (dev->config->get_status(dev) & VIRTIO_CONFIG_S_FAILED)
> > > + return -EIO;
> > > /* Acknowledge that we've seen the device. */
> > > virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
> > > @@ -373,6 +375,8 @@ int virtio_device_restore(struct virtio_device *dev)
> > > /* We always start by resetting the device, in case a previous
> > > * driver messed it up. */
> > > dev->config->reset(dev);
> > > + if (dev->config->get_status(dev) & VIRTIO_CONFIG_S_FAILED)
> > > + return -EIO;
> > > /* Acknowledge that we've seen the device. */
> > > virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
> > > diff --git a/drivers/virtio/virtio_pci_modern.c
> > > b/drivers/virtio/virtio_pci_modern.c
> > > index 2555d80..bfc5fc1 100644
> > > --- a/drivers/virtio/virtio_pci_modern.c
> > > +++ b/drivers/virtio/virtio_pci_modern.c
> > > @@ -270,6 +270,7 @@ static void vp_set_status(struct virtio_device *vdev,
> > > u8 status)
> > > static void vp_reset(struct virtio_device *vdev)
> > > {
> > > struct virtio_pci_device *vp_dev = to_vp_device(vdev);
> > > + int retry_count = 10;
> > > /* 0 status means a reset. */
> > > vp_iowrite8(0, &vp_dev->common->device_status);
> > > /* After writing 0 to device_status, the driver MUST wait for a
> > > read of
> > > @@ -277,8 +278,16 @@ static void vp_reset(struct virtio_device *vdev)
> > > * This will flush out the status write, and flush in device
> > > writes,
> > > * including MSI-X interrupts, if any.
> > > */
> > > - while (vp_ioread8(&vp_dev->common->device_status))
> > > + while (vp_ioread8(&vp_dev->common->device_status) && retry_count--)
> > > msleep(1);
> > > + /* If the read did not return 0 before the timeout consider that
> > > + * the device failed.
> > > + */
> > > + if (retry_count <= 0) {
> > > + virtio_add_status(vdev, VIRTIO_CONFIG_S_FAILED);
> > > + return;
> > > + }
> > > + virtio_add_status(vdev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
> > > /* Flush pending VQ/configuration callbacks. */
> > > vp_synchronize_vectors(vdev);
> > > }
> > > --
> > > 2.3.0
> >
>
>
> --
> Pierre Morel
> Linux/KVM/QEMU in Böblingen - Germany
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
