On 2020/8/5 下午1:45, Zhu, Lingshan wrote:
On 8/5/2020 10:36 AM, Jason Wang wrote:
On 2020/8/4 下午5:31, Zhu, Lingshan wrote:
On 8/4/2020 4:51 PM, Jason Wang wrote:
On 2020/7/31 下午2:55, Zhu Lingshan wrote:
This patch introduce a set of functions for setup/unsetup
and update irq offloading respectively by register/unregister
and re-register the irq_bypass_producer.
With these functions, this commit can setup/unsetup
irq offloading through setting DRIVER_OK/!DRIVER_OK, and
update irq offloading through SET_VRING_CALL.
Signed-off-by: Zhu Lingshan <lingshan....@intel.com>
Suggested-by: Jason Wang <jasow...@redhat.com>
---
drivers/vhost/Kconfig | 1 +
drivers/vhost/vdpa.c | 79
++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 79 insertions(+), 1 deletion(-)
diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
index d3688c6afb87..587fbae06182 100644
--- a/drivers/vhost/Kconfig
+++ b/drivers/vhost/Kconfig
@@ -65,6 +65,7 @@ config VHOST_VDPA
tristate "Vhost driver for vDPA-based backend"
depends on EVENTFD
select VHOST
+ select IRQ_BYPASS_MANAGER
depends on VDPA
help
This kernel module can be loaded in host kernel to accelerate
diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c
index df3cf386b0cd..278ea2f00172 100644
--- a/drivers/vhost/vdpa.c
+++ b/drivers/vhost/vdpa.c
@@ -115,6 +115,55 @@ static irqreturn_t vhost_vdpa_config_cb(void
*private)
return IRQ_HANDLED;
}
+static void vhost_vdpa_setup_vq_irq(struct vhost_vdpa *v, u16 qid)
+{
+ struct vhost_virtqueue *vq = &v->vqs[qid];
+ const struct vdpa_config_ops *ops = v->vdpa->config;
+ struct vdpa_device *vdpa = v->vdpa;
+ int ret, irq;
+
+ spin_lock(&vq->call_ctx.ctx_lock);
+ irq = ops->get_vq_irq(vdpa, qid);
+ if (!vq->call_ctx.ctx || irq < 0) {
+ spin_unlock(&vq->call_ctx.ctx_lock);
+ return;
+ }
+
+ vq->call_ctx.producer.token = vq->call_ctx.ctx;
+ vq->call_ctx.producer.irq = irq;
+ ret = irq_bypass_register_producer(&vq->call_ctx.producer);
+ spin_unlock(&vq->call_ctx.ctx_lock);
+}
+
+static void vhost_vdpa_unsetup_vq_irq(struct vhost_vdpa *v, u16 qid)
+{
+ struct vhost_virtqueue *vq = &v->vqs[qid];
+
+ spin_lock(&vq->call_ctx.ctx_lock);
+ irq_bypass_unregister_producer(&vq->call_ctx.producer);
Any reason for not checking vq->call_ctx.producer.irq as below here?
we only need ctx as a token to unregister vq from irq bypass
manager, if vq->call_ctx.producer.irq is 0, means it is a unused or
disabled vq,
This is not how the code is wrote? See above you only check whether
irq is negative, irq 0 seems acceptable.
Yes, IRQ 0 is valid, so we check whether it is < 0.
+ spin_lock(&vq->call_ctx.ctx_lock);
+ irq = ops->get_vq_irq(vdpa, qid);
+ if (!vq->call_ctx.ctx || irq < 0) {
+ spin_unlock(&vq->call_ctx.ctx_lock);
+ return;
+ }
+
+ vq->call_ctx.producer.token = vq->call_ctx.ctx;
+ vq->call_ctx.producer.irq = irq;
+ ret = irq_bypass_register_producer(&vq->call_ctx.producer);
+ spin_unlock(&vq->call_ctx.ctx_lock);
no harm if we
perform an unregister on it.
+ spin_unlock(&vq->call_ctx.ctx_lock);
+}
+
+static void vhost_vdpa_update_vq_irq(struct vhost_virtqueue *vq)
+{
+ spin_lock(&vq->call_ctx.ctx_lock);
+ /*
+ * if it has a non-zero irq, means there is a
+ * previsouly registered irq_bypass_producer,
+ * we should update it when ctx (its token)
+ * changes.
+ */
+ if (!vq->call_ctx.producer.irq) {
+ spin_unlock(&vq->call_ctx.ctx_lock);
+ return;
+ }
+
+ irq_bypass_unregister_producer(&vq->call_ctx.producer);
+ vq->call_ctx.producer.token = vq->call_ctx.ctx;
+ irq_bypass_register_producer(&vq->call_ctx.producer);
+ spin_unlock(&vq->call_ctx.ctx_lock);
+}
I think setup_irq() and update_irq() could be unified with the
following logic:
irq_bypass_unregister_producer(&vq->call_ctx.producer);
irq = ops->get_vq_irq(vdpa, qid);
if (!vq->call_ctx.ctx || irq < 0) {
spin_unlock(&vq->call_ctx.ctx_lock);
return;
}
vq->call_ctx.producer.token = vq->call_ctx.ctx;
vq->call_ctx.producer.irq = irq;
ret = irq_bypass_register_producer(&vq->call_ctx.producer);
Yes, this code piece can do both register and update. Though it's
rare to call undate_irq(), however
setup_irq() is very likely to be called for every vq, so this may
cause several rounds of useless irq_bypass_unregister_producer().
I'm not sure I get this but do you have a case for this?
I mean if we use this routine to setup irq offloading, it is very likely to do
a unregister producer for every vq first, but for nothing.
Does it really harm? See vfio_msi_set_vector_signal()
is it worth for simplify the code?
Less code(bug).
I can do this if we are chasing for perfection, however I believe bug number
has positive correlation with the complexity in the logic than code lines, if
we only merge lines, this may not help.
Well, reduce code duplication is always good and it helps for reviewers.
+
static void vhost_vdpa_reset(struct vhost_vdpa *v)
{
struct vdpa_device *vdpa = v->vdpa;
@@ -155,11 +204,15 @@ static long vhost_vdpa_set_status(struct
vhost_vdpa *v, u8 __user *statusp)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
- u8 status;
+ u8 status, status_old;
+ int nvqs = v->nvqs;
+ u16 i;
if (copy_from_user(&status, statusp, sizeof(status)))
return -EFAULT;
+ status_old = ops->get_status(vdpa);
+
/*
* Userspace shouldn't remove status bits unless reset the
* status to 0.
@@ -169,6 +222,15 @@ static long vhost_vdpa_set_status(struct
vhost_vdpa *v, u8 __user *statusp)
ops->set_status(vdpa, status);
+ /* vq irq is not expected to be changed once DRIVER_OK is
set */
Let's move this comment to the get_vq_irq bus operation.
OK, can do!
+ if ((status & VIRTIO_CONFIG_S_DRIVER_OK) && !(status_old &
VIRTIO_CONFIG_S_DRIVER_OK))
+ for (i = 0; i < nvqs; i++)
+ vhost_vdpa_setup_vq_irq(v, i);
+
+ if ((status_old & VIRTIO_CONFIG_S_DRIVER_OK) && !(status &
VIRTIO_CONFIG_S_DRIVER_OK))
+ for (i = 0; i < nvqs; i++)
+ vhost_vdpa_unsetup_vq_irq(v, i);
+
return 0;
}
@@ -332,6 +394,7 @@ static long
vhost_vdpa_set_config_call(struct vhost_vdpa *v, u32 __user *argp)
return 0;
}
+
static long vhost_vdpa_vring_ioctl(struct vhost_vdpa *v,
unsigned int cmd,
void __user *argp)
{
@@ -390,6 +453,7 @@ static long vhost_vdpa_vring_ioctl(struct
vhost_vdpa *v, unsigned int cmd,
cb.private = NULL;
}
ops->set_vq_cb(vdpa, idx, &cb);
+ vhost_vdpa_update_vq_irq(vq);
break;
case VHOST_SET_VRING_NUM:
@@ -765,6 +829,18 @@ static int vhost_vdpa_open(struct inode
*inode, struct file *filep)
return r;
}
+static void vhost_vdpa_clean_irq(struct vhost_vdpa *v)
+{
+ struct vhost_virtqueue *vq;
+ int i;
+
+ for (i = 0; i < v->nvqs; i++) {
+ vq = &v->vqs[i];
+ if (vq->call_ctx.producer.irq)
+ irq_bypass_unregister_producer(&vq->call_ctx.producer);
+ }
+}
Why not using vhost_vdpa_unsetup_vq_irq()?
IMHO, in this cleanup phase, the device is almost dead, user space
won't change ctx anymore, so I think we don't need to check ctx or irq,
But you check irq here? For ctx, irq_bypass_unregister_producer() can
do the check instead of us.
IMHO, maybe irq does not matter, (1)if the vq not registered to irq bypass
manager, producer.irq is not valid, token == NULL, irq_bypass_unregister would
no nothing.
(2)if the vq registered to irq bypass manager, producer.irq is valid,
irq_bypass_unregister will do its work based on the token.
so maybe we can say irq is relative to the token, we may don't need to check
irq here.
So you agree to use vhost_vdpa_unsetup_vq_irq()?
Thanks
Thanks!
Thanks
can just unregister it.
Thanks!
Thanks
+
static int vhost_vdpa_release(struct inode *inode, struct file
*filep)
{
struct vhost_vdpa *v = filep->private_data;
@@ -777,6 +853,7 @@ static int vhost_vdpa_release(struct inode
*inode, struct file *filep)
vhost_vdpa_iotlb_free(v);
vhost_vdpa_free_domain(v);
vhost_vdpa_config_put(v);
+ vhost_vdpa_clean_irq(v);
vhost_dev_cleanup(&v->vdev);
kfree(v->vdev.vqs);
mutex_unlock(&d->mutex);
_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
