> sounds good. Add a code comment?
I will.
> yes but I now see two places that seem to include this logic.
Yes, this is because the same logic is applied on 2 different pairs.
* secure_erase_sector_alignment and discard_sector_alignment are used
to calculate q->limits.discard_granularity.
* max_discard_seg and max_secure_erase_seg are used to calculate
max_discard_segments.
> I am not 100% sure. Two options:
> 1- Add a validate callback and clear VIRTIO_BLK_F_SECURE_ERASE.
> 2- Alternatively, fail probe.
Good ideas.
2- Do you think that something like that should be mentioned in the
spec? or should be implementation specific?
How about setting the value to 1? (which is the minimum usable value)
> which is preferable depends on how bad is it if host sets
> VIRTIO_BLK_F_SECURE_ERASE but guest does not use it.
I'm not sure if it is that bad.
If the value is 0, sg_elems is used.
sg_elems is either 1 (if VIRTIO_BLK_F_SEG_MAX is not negotiated), or
seg_max (virtio config).
"""
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_SEG_MAX,
struct virtio_blk_config, seg_max,
&sg_elems);
/* We need at least one SG element, whatever they say. */
if (err || !sg_elems)
sg_elems = 1;
"""
So the only "danger" that I can think of is if a device negotiates
VIRTIO_BLK_F_SEG_MAX and VIRTIO_BLK_F_SECURE_ERASE, sets
max_secure_erase_seg to 0 (I'm not sure what is the purpose, since
this is meaningless), and can't handle secure erase commands with
seg_max segments.
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization
