This patch actually uses the gs register to implement the per-cpu
sections. It's fairly straightforward: the gs segment starts at the
per-cpu offset for the particular cpu (or 0, in very early boot).
We also implement x86_64-inspired (via Jeremy Fitzhardinge) per-cpu
accesses where a general lvalue isn't needed. These
single-instruction accesses are slightly more efficient, plus (being a
single insn) are atomic wrt. preemption so we can use them to
implement cpu_local_inc etc.
Signed-off-by: Rusty Russell <[EMAIL PROTECTED]>
Index: ak-fresh/arch/i386/kernel/cpu/common.c
===================================================================
--- ak-fresh.orig/arch/i386/kernel/cpu/common.c 2006-09-22 16:48:14.000000000
+1000
+++ ak-fresh/arch/i386/kernel/cpu/common.c 2006-09-22 17:02:47.000000000
+1000
@@ -13,6 +13,7 @@
#include <asm/mmu_context.h>
#include <asm/mtrr.h>
#include <asm/mce.h>
+#include <asm/smp.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
@@ -601,12 +602,24 @@
struct thread_struct *thread = ¤t->thread;
struct desc_struct *gdt;
__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
- struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
if (cpu_test_and_set(cpu, cpu_initialized)) {
printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
for (;;) local_irq_enable();
}
+
+ /* Set up GDT entry for 16bit stack */
+ stk16_off = (u32)&per_cpu(cpu_16bit_stack, cpu);
+ gdt = per_cpu(cpu_gdt_table, cpu);
+ *(__u64 *)(&gdt[GDT_ENTRY_ESPFIX_SS]) |=
+ ((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
+ ((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
+ (CPU_16BIT_STACK_SIZE - 1);
+
+ /* Complete percpu area setup early, before calling printk(),
+ since it may end up using it indirectly. */
+ setup_percpu_for_this_cpu(cpu);
+
printk(KERN_INFO "Initializing CPU#%d\n", cpu);
if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
@@ -618,17 +631,6 @@
set_in_cr4(X86_CR4_TSD);
}
- /* Set up GDT entry for 16bit stack */
- gdt = __get_cpu_var(cpu_gdt_table);
- *(__u64 *)(&gdt[GDT_ENTRY_ESPFIX_SS]) |=
- ((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
- ((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
- (CPU_16BIT_STACK_SIZE - 1);
-
- cpu_gdt_descr->size = GDT_SIZE - 1;
- cpu_gdt_descr->address = (unsigned long)gdt;
-
- load_gdt(cpu_gdt_descr);
load_idt(&idt_descr);
/*
Index: ak-fresh/arch/i386/kernel/smpboot.c
===================================================================
--- ak-fresh.orig/arch/i386/kernel/smpboot.c 2006-09-22 16:48:14.000000000
+1000
+++ ak-fresh/arch/i386/kernel/smpboot.c 2006-09-22 17:02:47.000000000 +1000
@@ -102,6 +102,9 @@
{ [0 ... NR_CPUS-1] = 0xff };
EXPORT_SYMBOL(x86_cpu_to_apicid);
+DEFINE_PER_CPU(unsigned long, this_cpu_off);
+EXPORT_PER_CPU_SYMBOL(this_cpu_off);
+
/*
* Trampoline 80x86 program as an array.
*/
@@ -1303,6 +1306,37 @@
synchronize_tsc_bp();
}
+static inline void set_kernel_gs(void)
+{
+ /* Set %gs for this CPU's per-cpu area. Memory clobber is to create a
+ barrier with respect to any per-cpu operations, so the compiler
+ doesn't move any before here. */
+ asm volatile ("mov %0, %%gs" : : "r" (__KERNEL_PERCPU) : "memory");
+}
+
+static __cpuinit void setup_percpu_descriptor(struct desc_struct *gdt,
+ unsigned long per_cpu_off)
+{
+ unsigned limit, flags;
+
+ limit = (1 << 20);
+ flags = 0x8; /* 4k granularity */
+
+ /* present read-write data segment */
+ pack_descriptor((u32 *)&gdt->a, (u32 *)&gdt->b,
+ per_cpu_off, limit - 1,
+ 0x80 | DESCTYPE_S | 0x2, flags);
+}
+
+/* Set up a very early per-cpu for the boot CPU so that smp_processor_id()
+ and current will work. */
+void __init smp_setup_processor_id(void)
+{
+ /* We use the per-cpu template area (__per_cpu_offset[0] == 0). */
+ __per_cpu_offset[0] = 0;
+ setup_percpu_for_this_cpu(0);
+}
+
/* These are wrappers to interface to the new boot process. Someone
who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -1313,8 +1347,25 @@
smp_boot_cpus(max_cpus);
}
+/* Be careful not to use %gs references until this is setup: needs to
+ * be done on this CPU. */
+void __init setup_percpu_for_this_cpu(unsigned int cpu)
+{
+ struct desc_struct *gdt = per_cpu(cpu_gdt_table, cpu);
+ struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
+
+ per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
+ setup_percpu_descriptor(&gdt[GDT_ENTRY_PERCPU], __per_cpu_offset[cpu]);
+ cpu_gdt_descr->address = (unsigned long)gdt;
+ cpu_gdt_descr->size = GDT_SIZE - 1;
+ load_gdt(cpu_gdt_descr);
+ set_kernel_gs();
+}
+
void __devinit smp_prepare_boot_cpu(void)
{
+ setup_percpu_for_this_cpu(0);
+
cpu_set(smp_processor_id(), cpu_online_map);
cpu_set(smp_processor_id(), cpu_callout_map);
cpu_set(smp_processor_id(), cpu_present_map);
Index: ak-fresh/include/asm-i386/percpu.h
===================================================================
--- ak-fresh.orig/include/asm-i386/percpu.h 2006-09-22 16:48:14.000000000
+1000
+++ ak-fresh/include/asm-i386/percpu.h 2006-09-22 16:59:00.000000000 +1000
@@ -1,6 +1,107 @@
#ifndef __ARCH_I386_PERCPU__
#define __ARCH_I386_PERCPU__
+#ifdef CONFIG_SMP
+/* Same as generic implementation except for optimized local access. */
+#define __GENERIC_PER_CPU
+
+/* This is used for other cpus to find our section. */
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+/* Separate out the type, so (int[3], foo) works. */
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu__##name
+#define DEFINE_PER_CPU(type, name) \
+ __attribute__((__section__(".data.percpu"))) __typeof__(type)
per_cpu__##name
+
+/* We can use this directly for local CPU (faster). */
+DECLARE_PER_CPU(unsigned long, this_cpu_off);
+
+/* var is in discarded region: offset to particular copy we want */
+#define per_cpu(var, cpu) (*({ \
+ extern int simple_indentifier_##var(void); \
+ RELOC_HIDE(&per_cpu__##var, __per_cpu_offset[cpu]); }))
+
+#define __raw_get_cpu_var(var) (*({ \
+ extern int simple_indentifier_##var(void); \
+ RELOC_HIDE(&per_cpu__##var, x86_read_percpu(this_cpu_off)); \
+}))
+
+#define __get_cpu_var(var) __raw_get_cpu_var(var)
+
+/* A macro to avoid #include hell... */
+#define percpu_modcopy(pcpudst, src, size) \
+do { \
+ unsigned int __i; \
+ for_each_possible_cpu(__i) \
+ memcpy((pcpudst)+__per_cpu_offset[__i], \
+ (src), (size)); \
+} while (0)
+
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+/* gs segment starts at (positive) offset == __per_cpu_offset[cpu] */
+#define __percpu_seg "%%gs:"
+#else /* !SMP */
#include <asm-generic/percpu.h>
+#define __percpu_seg ""
+#endif /* SMP */
+
+/* For arch-specific code, we can use direct single-insn ops (they
+ * don't give an lvalue though). */
+extern void __bad_percpu_size(void);
+
+#define percpu_to_op(op,var,val) \
+ do { \
+ typedef typeof(var) T__; \
+ if (0) { T__ tmp__; tmp__ = (val); } \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ case 2: \
+ asm(op "w %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ case 4: \
+ asm(op "l %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ :"ri" ((T__)val)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ } while (0)
+
+#define percpu_from_op(op,var) \
+ ({ \
+ typeof(var) ret__; \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 2: \
+ asm(op "w "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 4: \
+ asm(op "l "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ ret__; })
+
+#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
+#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
#endif /* __ARCH_I386_PERCPU__ */
Index: ak-fresh/include/asm-i386/smp.h
===================================================================
--- ak-fresh.orig/include/asm-i386/smp.h 2006-09-22 16:48:14.000000000
+1000
+++ ak-fresh/include/asm-i386/smp.h 2006-09-22 17:02:47.000000000 +1000
@@ -86,6 +86,8 @@
extern void __cpu_die(unsigned int cpu);
extern unsigned int num_processors;
+void setup_percpu_for_this_cpu(unsigned int cpu);
+
#endif /* !__ASSEMBLY__ */
#else /* CONFIG_SMP */
@@ -94,6 +96,8 @@
#define NO_PROC_ID 0xFF /* No processor magic marker */
+#define setup_percpu_for_this_cpu(cpu)
+
#endif
#ifndef __ASSEMBLY__
Index: ak-fresh/arch/i386/kernel/setup.c
===================================================================
--- ak-fresh.orig/arch/i386/kernel/setup.c 2006-09-22 17:02:46.000000000
+1000
+++ ak-fresh/arch/i386/kernel/setup.c 2006-09-22 17:03:49.000000000 +1000
@@ -1474,6 +1474,8 @@
/* ESPFIX 16-bit SS */
[GDT_ENTRY_ESPFIX_SS] = { 0x00000000, 0x00009200 },
+ /* FIXME: We save/restore %gs even on UP: fix entry.S. */
+ [GDT_ENTRY_PERCPU] = { 0x0000ffff, 0x00cf9200 },
};
/* Early in boot we use the master per-cpu gdt_table directly. */
--
Help! Save Australia from the worst of the DMCA: http://linux.org.au/law
_______________________________________________
Virtualization mailing list
[email protected]
https://lists.osdl.org/mailman/listinfo/virtualization
