Hi Peter,
The DefaultHost can be set in the "URIQA" section of the Virtuoso configuration
as detailed at:
http://docs.openlinksw.com/virtuoso/dbadm.html#ini_URIQA
This should be set to the external hostname clients will be accessing the
Virtuoso server as via the proxy, and should be set on server initial setup
such that any generated IRIs of RDF data is created with the correct hostname
in the href enabling clients to access then via the proxy ...
Best Regards
Hugh Williams
Professional Services
OpenLink Software
Web: http://www.openlinksw.com
Support: http://support.openlinksw.com
Forums: http://boards.openlinksw.com/support
Twitter: http://twitter.com/OpenLink
On 25 May 2010, at 22:16, Peter DeVries wrote:
> How do you set the name of the
>
> Virtuoso server startup parameters
> Virtuoso configuration file "/etc/virtuoso-opensource-6.0/virtuoso.ini"
>
> "Default Host" when the Virtuoso machine is hosted behind a reverse-proxy
> running on a separate machine?
>
> - Pete
>
>
>
> --
> ----------------------------------------------------------------
> Pete DeVries
> Department of Entomology
> University of Wisconsin - Madison
> 445 Russell Laboratories
> 1630 Linden Drive
> Madison, WI 53706
> GeoSpecies Knowledge Base
> About the GeoSpecies Knowledge Base
> ------------------------------------------------------------
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Virtuoso-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/virtuoso-users
