Hi, First of all, congratulations Daniele for this amazing piece of software.
I have been trying to get a functional BRI (TE mode) with Asterisk for some time now. I am working on a Soekris box, and I initially started my tests with the AstLinux distribution. It comes with mISDN and chan_misdn. I found that latency was increasing over time... Useless for me ! I then tested chan_zap with BRIstuff. Sound on the Soekris was horrible. Probably a problem with too many interrupts taking the box on its knees (The Soekris is 266 MhZ). I then tested chan_capi-cm with a Fritz! Card. That's the best solution I have found so far, but getting CAPI to work on 2.6 is not that funny :-) And then came vISDN ! To make things a bit more complex, I am running Asterisk 1.2.0-RC2. With the help of Matteo's patch, I could compile everything. I also had to upgrade my box to bash 3.0 (for the configurator). The result seems to be amazing call quality ! However, for some reasons, I cannot get DTMF to be handled by Asterisk... I am dialing the DEMO context on the box, and I cannot get DTMF to work. Is there a reason for that ? Finally, the next step will be to forward calls to IAX or SIP trunks, and I wonder if I should use zaptel/ztdummy to get a proper timing, or whether vISDN can provide that. Anyway, thanks for the work, and thanks for reading. BR, - Patrick - _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
