On Sun, January 15, 2006 16:46, Daniele Orlandi said:
> On Sunday 15 January 2006 16:21, you wrote:
>>
>> Yes ist sync ppp.
>> Will i tbe supported in the near future ?
>
> It depends on how you define "near future" :)
>
> Let's say that if the clocks on the two boards are not too much different
> you
> may get acceptable results even without recuring to HDLC frames.
>
> You may do some test, let me know the results.
>
It is possible to put a hfc chip in to slave mode, and then use the timers
from a master card by connecting pins 52, 54 and 55 in parallel.
Florian's patch fo BriStuff enables this feature for zaptel, and I am
using this in one of my machines...
Maybe this could help in above situation, but it would probably require
quite some extra coding to support this in vISDN...
--
F Peeters
PIII 450 - 1 GB - * 1.2 - BRIstuff 0.3.0 Pre 1 - Florz patch
2 Sweex HFC-PCI modes=2 sync_slave=2 timer_card=0
Cologne HFC-S pins #52, #54, #55 connected in parallel for synching.
AMD Duron 1GHz - 1GB - * 1.2.1
2 Sweex HFC-PCI cards
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
