On Tuesday 21 February 2006 01:34, Tobias Stefan Richter wrote:
> Hi,
>
> first of all: Nice work! Most things function perfectly and
> there are many means provided to examine everything in detail
> (debugging of chan_visdn and /sys/). Very very nice.
Thanks :)
> Callerids are bothering me, though. From the TE card the ${CALLERIDNUM}
> received is missing the leading zero (national prefix), regardless of
> the setting of cli_rewriting.
Can you post the "debug visdn q931" dump of the SETUP message with Calling
Party Number IE ?
Enabling cli_rewriting should do what you expect.
> Worse luck on the NT cards: CLIs defined in the phones are not available
> in ${CALLERIDNUM} and are also not passed on when bridging the call
> outside. I defined my clip_numbers, but that didn't help. Any ideas?
Is the CLI rewritten with clip_default_number or is it missing altogether?
Did you change clir_mode?
Can you post that SETUP message too?
> By the way VISDNOverlapDial takes ages to complete (12 seconds roughly).
> Is there a way speed that up a bit?
It's exactly 12 seconds. It is a network-defined timer (T302). It should be
harmless to change that value, however the minimum defined by the specs is 10
seconds, you should not go beyond that limit.
It is much better to define your extensions in a way that limits the maching
to the correct maximum numbers.
Bye,
--
Daniele Orlandi
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
