sorry for lamerness ...
i'm trying to show a visdn call
what's wrong?
*CLI> show visdn calls
Interface: visdn0
CallRef State
94.I U10_ACTIVE 2
*CLI> show visdn calls visdn0/94.I
Invalid call reference
here is my setup:
*CLI> show visdn interfaces
-- visdn0 --
Role : TE
Mode : Point-to-Multipoint
TEI : 0
Network role : Private Network
Outbound type of number : unknown
Forced CLI :
Forced CLI type of number : unset
Tones option : Yes
Echo canceller : No
Echo canceller taps : 256 (32 ms)
Context : visdn0_in
Transparent Numbers : 300
Overlap Sending : Yes
Overlap Receiving : No
Call bumping : No
CLI rewriting : No
National prefix : 0
International prefix : 00
Newtork specific prefix :
Subscriber prefix :
Abbreviated prefix :
Autorelease time : 10
CLIR mode : Default off
CLIP enabled : Yes
CLIP override : No
CLIP default : vISDN <300>
CLIP special arrangement : No
CLIP Numbers : 300
T301: 180 T302: 6 T303: 5 T304: 999
T305: 30 T306: 0 T307: 180
T308: 4
T309: 6 T310: 40 T312: 0 T313: 4
T314: 4 T316: 120 T317: 60 T318: 4 T319: 4
T320: 0 T321: 30 T322: 4
TIA
--
Maurizio Marini
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
