I have discovered something strange. The delay problem is not apparent when I use xlite instead of my ATA box. Still, the first call on the ATA box is fine after reloading the modules.
The ATA box is also fine with the zaphfc driver. On Tuesday 28 February 2006 11:41, Florian Heese wrote: > Hello, > > depending on the hfc-pci delay issue i tried to figure out the fifos on my > system: > > Kernel: 2.6.15.3 #1 SMP Wed Feb 8 22:42:48 CET 2006 i686 GNU/Linux > Asterisk: 1.2.4 > visdn: isdn--devel--0.1--patch-569 > > visdn0 role NT > visdn1 role TE > > After the first call from HFC-PCI_te to HFT-PCI_nt (the first call is > without delay) i get: > > *CLI> show visdn calls > ID State Number > visdn0/23.O N10_ACTIVE 9514608 > ID State Number > visdn1/1.I U10_ACTIVE (SC) > > *CLI> show visdn calls visdn0/23.O > --------- Call 23 outbound (3 refs) > Interface : visdn0 > DLC (TEI) : 67 > State : N10_ACTIVE > Broadcast seutp : Yes > Tones option : No > Active timers : > CES: > ------ Asterisk Channel > Number : 9514608 > Options : > Is voice : Yes > Handle stream : Yes > Streamport Chanid : 000015 > EC NearEnd Chanid : 000000 > EC FarEnd Chanid : 000000 > ISDN Chanid : 000002 > In-band informations : No > DTMF Deferred : Yes > > cat 000015/tx_fifo_usage from 0 up to 160 and down to 0 (more zeros) > cat 000015/rx_fifo_usage from 0 to 64 to 96 to 128 to 32... (behaves like a > sin shape) > > *CLI> show visdn calls visdn1/1.I > --------- Call 1 inbound (3 refs) > Interface : visdn1 > DLC (TEI) : 0 > State : U10_ACTIVE > Broadcast seutp : No > Tones option : Yes > Active timers : > CES: > ------ Asterisk Channel > Number : (SC) > Options : > Is voice : Yes > Handle stream : Yes > Streamport Chanid : 000016 > EC NearEnd Chanid : 000000 > EC FarEnd Chanid : 000000 > ISDN Chanid : 000008 > In-band informations : No > DTMF Deferred : No > > cat 000016/tx_fifo_usage from 0 up to 160 and down to 0 (more zeros) > cat 000016/rx_fifo_usage from 0 to 64 to 96 to 128 to 32... (behaves like a > sin(x) shape) > > > After the second call I get exactly the same fifo results, but with about 1 > second delay. The first thing I hear, if i pickup the phone connected to > the NT-Port is the last second from the last call. > > > If i pickup my phone connected to the HFC-PCI_nt to make a call, i can hear > the last second from the call before, too. After that i can make a call > wich dooe not have a delay. > > restarting asterisk does not effect the delay issue. > I reloaded the visdn_hfc_pci module and then do visdn_configurator, but i > get: ioctl(IOC_CREATE): File exists > > > > ...strange > > > kind regards > > fheese _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
