Hi Very simple/stupid solution to my problem ... Simple reboot machine and the library seems upgrade with my new visdn installation.. :-) But i still have audio problem.. Is possible some problem related to sync frame with DECT Phone? many thanks
> Hi > as describe in my last email i cant able to place an incoming call using > patch 571, but also with my previus working version 544 after i upgrade > to new version... > I have configure visdn.conf & device file with "Mode P2MP", if i use > visdnctl netdev show report good config: > > visdn0: UP NT PtMP > > If i try to see visdn interface from * CLI i have: > *CLI> show visdn interfaces > > -- visdn0 -- > Network role : Private Network > Outbound type of number : unknown > Forced CLI : > Forced CLI type of number : unset > Tones option : Yes > Echo canceller : No > Echo canceller taps : 256 (32 ms) > Context : custom-visdn > Language : > Transparent Numbers : 300 > Overlap Sending : Yes > Overlap Receiving : Yes > Call bumping : No > CLI rewriting : No > National prefix : 0 > International prefix : 00 > Newtork specific prefix : > Subscriber prefix : > Abbreviated prefix : > Autorelease time : 10 > CLIR mode : Default off > CLIP enabled : Yes > CLIP override : No > CLIP default : vISDN <300> > CLIP special arrangement : No > CLIP Numbers : 300 > Parked calls: > ------ > > This very strange because as i can see another post i should see other > two line related to Mode configuration & also TEI like: > *CLI> show visdn interfaces > -- visdn0 -- > Role : TE > Mode : Point-to-Multipoint > TEI : 0 > Network role : Private Network > Outbound type of number : unknown > Forced CLI : > Forced CLI type of number : unset > Tones option : Yes > Echo canceller : No > Echo canceller taps : 256 (32 ms) > Context : visdn0_in > Transparent Numbers : 300 > Overlap Sending : Yes > Overlap Receiving : No > Call bumping : No > CLI rewriting : No > National prefix : 0 > International prefix : 00 > Newtork specific prefix : > Subscriber prefix : > Abbreviated prefix : > Autorelease time : 10 > CLIR mode : Default off > CLIP enabled : Yes > CLIP override : No > CLIP default : vISDN <300> > CLIP special arrangement : No > CLIP Numbers : 300 > T301: 180 T302: 6 T303: 5 T304: 999 > T305: 30 T306: 0 T307: 180 > T308: 4 > T309: 6 T310: 40 T312: 0 T313: 4 > T314: 4 T316: 120 T317: 60 T318: 4 T319: 4 > T320: 0 T321: 30 T322: 4 > --------------- > > Is possible some problem when i make the upgrade? Seems * use the old > chan_visdn, but as i see from /usr/lib/asterisk/modules the file have > correct date of new install... > Also i have try a lot of time to recompile/install visdn.. but no success.. > many thanks for possible info > > Sincerelly > Dimitri > > > ------------------------- C.F. Modelli s.r.l. Tel. 0119910472 Fax 0119915128 email: [EMAIL PROTECTED] _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
