Hi,
the patch shown there doesn't work for me. In the thread someone else
aswell stated
that it didn't work for him either!
Did it work for you?
Regards,
Jochen
Borghart Steffen schrieb:
Hi,
the same error is reported here, and patch to solve it is posted as well:
http://www.ip-phone-forum.de/showthread.php?t=95653
regards, borghart
On Tue, Mar 14, 2006 at 03:50:43PM +0100, Jochen Kokemüller wrote:
Borghart Steffen wrote:
Hi,
I use asterisk with one hfc card in NT mode. Today I installed the
current visdn-snapshot to give visdn a try. However, when I dial for
example 1234 on my isdn phone, asterisk dials 11223344. Is this a bug,
or are my config files wrong? In the latter case, how can i fix the
issue?
Best regards, Borghart
Hi,
in my case I experience the same situation but in different circumstances.
I use a hfc-pci card in NT mode and a fritz card using capi 2.0.
To the hfc card is a isdn phone and analogue converter (teledat 2 a/b usb)
with three phones connected. In difference to the above post i have no
problems at all using the isdn phone. In contrast using any one of the
analogue phones produces exactly the same problem.
Any suggestions would be greatly appreciated!
Best regards, Jochen
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
