Hello Thomas, thanks for that hint, it did the trick with the huntgroup ;-) Still got the problem with the driver unload
BR Mit freundlichen Grüßen Stephan Fuchs Netzwerktechniker CAMDATA GmbH Eickener Straße 133 41063 Mönchengladbach Fon +49 (0) 21 61 185 85 80 Fax +49 (0) 21 61 185 85 85 E-Mail [EMAIL PROTECTED] Web www.camdata.de -----Ursprüngliche Nachricht----- Von: Thomas Härtl [mailto:[EMAIL PROTECTED] Gesendet: Dienstag, 28. März 2006 12:48 An: Fuchs, Stephan; [email protected] Betreff: [Visdn-hackers] Driver unload & huntgroups > > Second questions is regarding huntgroups. > > I've configured 3 HFC-PCI Cards, "show visdn channels" shows 6 available B > channels, so asterisk recognizes the cards now. > > *CLI> show visdn channels > Interface: visdn0 > B1: AVAILABLE > B2: AVAILABLE > Interface: visdn1 > B1: AVAILABLE > B2: AVAILABLE > Interface: visdn2 > B1: AVAILABLE > B2: AVAILABLE > > In my /etc/asterisk/visdn.conf the huntgroup is configured as > > [huntgroup:telco] > mode = sequential > members = visdn0 visdn1 visdn2 > Try members = visdn0, visdn1, visdn2 in visdn.conf [Die Kommas sind wohl wichtig ;-)] and the e.g. the following in your extensions.conf exten => s,1,Dial(VISDN/huntgroup:telco/${EXTEN}) best regards, TOM _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
