On Mon April 17 2006 23:54, George Spiliotis wrote:
> I think that following the instructions below you can install vISDN with
[EMAIL PROTECTED] 2.8:
>
> First of all install the stock [EMAIL PROTECTED] 2.8
we did
> Install the tla command by downloading GNU arch and installing it
with prefix /usr
we did
> Follow the instructions on vISDN site to extract the latest development
brach of vISDN
we installed 625
> Load the missing packages for CentOS 4.3:
> yum install automake gcc-c++ autoconf libtool
yes, here the same
>
> Go to the vISDN directory and run ./bootstrap
> Then run ./configure
> Then run make install (for some strange reason the modules were not
installed with patch 625 so cd modules; make; make install)
> Then do a depmod a and an ldconfig
> Now do the following command:
> cp samples/30-visdn.rules-oldudev /etc/udev/rules.d/30-visdn.rules
>
> Then edit the file /etc/udev/rules/30-visdn.rules and add at the end the
line:
> KERNEL="router-control", NAME="visdn/router-control" GROUP="asterisk"
MODE="0660"
> Also change all pbx strings to: asterisk
>
> Create the directory /usr/local/etc/visdn
> Copy the correct card config file from the samples directory
into /usr/local/etc/visdn. For my card (a simple HFC/PCI) I copied the file
device-pci-0000:00:07.0 as device-pci-0000:00:14.0 as I have found out
using the command lspci what is the pci number of my card.
> Go to the directory scripts and make install
> add the following line in /etc/rc.d/rc.local just before amp startup
(before the /usr/sbin/amportal start line)
> /usr/local/sbin/visdn_configurator
yes, we did
>
>
>
> Go to /usr/src/asterisk and patch asterisk:
> patch < /path/to/visdn/samples/asterisk-1.2.5-cap.diff
> patch -p1 < /path/to/visdn/samples/asterisk-1.2-disconnect.diff
> patch -p1 < /path/to/visdn/samples/asterisk-1.2-answer.diff
> (dont be alarmed by the offset of the patch application).
we didn't, yet
>
> Then run: make clean; /usr/sbin/amportal stop; make install;
>
> Create the file /etc/asterisk/visdn.conf in accordance with your card.
See the visdn.conf.sample in the vISDN samples directory.
what did you have in it?
>
> Edit the file /var/www/html/panel/op_buttons_custom.cfg and add the
following block:
> [vISDN/0]
> Position=55
> Label="vISDN"
> Extension=-1
> Icon=3
> Panel_Context=default
> (change the position to suit your needs and also add more blocks like that
if you have more than one vISDN trunk.
>
> Restart FreePBX with /usr/sbin/amportal start
>
> Start asterisk with r and check with:
> show visdn interfaces
> that everything is OK.
>
> Create a custom trunk in FreePBX with a DialString:
VISDN/visdn0/$OUTNUM$ (of course you can customize this string if you have
more than one interface).
with 625, when we call, we can hear each other without problem; when we are
called, instead, we are able to hear caller, but caller doesn't hear well
(chopped audio);
with 607, instead, still no problem
Thnx
M.
--
Maurizio Marini
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
