Hi there,
I have also been testing the hfc-4s driver (visdn patch 662) with
asterisk 1.2.9.1 as follows:-
Telecom (NT) <-----> HFC-4S (TE) <--------> Asterisk
The problem I have is this. When the driver is first loaded with the
ISDN line connected to the TE port, the data link is activated, and
incoming and outgoing calls are OK. Then I disconnected the line, wait
for 10-15 seconds and then reconnected the line into the same port. I
saw the LAPD message PH-ACTIVATE-INDICATION indicating the physical
layer is up. As soon as I make an incoming call (NT -> TE), the link is
immediately deactivated and the call fails:-
F7_ACTIVATED => F6_SYNCHRONIZED => F3_DEACTIVATED
Next when I make an outgoing call, the link has trouble reactivating. If
I stop asterisk and reload the driver, the link comes up and I can make
calls again!
Has anyone experienced this problem?
Cheers,
Stephen Yong
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
