You will need to modify the install instructions according to: http://open.voismart.it/index.php/VGSM
So don't install the visdn_configurator in rc.local. You might want to create a script with the modprobe commands and then call this from rc.local. You should probably also delete the device-pci- file as that may conflict when you load the kernel drivers. Matteo can you confirm this? There may be a huge showstopper here!! vGSM has a requirement for kernel version 2.6.13. Centos (Linux distro in Trixbox) has kernel version 2.6.9 + some redhat patches. You may not have met the minimum requirements. You can of course upgrade the kernel but you will then have fallen out of the Centos kernel updates via yum. Anyway you should try it and see..! If there are any issues maybe we can findout what exactly vGSM needs in the 2.6.13 kernel that is not in the 2.6.9 kernel and update that much like we did for udev. Matteo: I can't seem to find anywhere to buy any of your cards :( Rehan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marcin M. Sent: 18 July 2006 21:45 To: [email protected] Subject: [Visdn-hackers] VoiSmart vGSM install problem... Hi, I have big problem with installing Voismart vGsm card.. I had installed Trixbox 1.1 and vISDN support.. (http://www.trixbox.org/modules/newbb/viewtopic.php?viewmode=thread&topi c_id=1367&forum=7&post_id=6207#6207 <http://www.trixbox.org/modules/newbb/viewtopic.php?viewmode=thread&topi c_id=1367&forum=7&post_id=6207#6207>) isdn-devel-20060704 udev-094 zaptel 1.2.6 after that : lspci 01:08.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface lsmod lapd 60976 0 visdn_hfc_e1 60164 0 visdn_hfc_usb 26628 0 visdn_hfc_pci 38788 0 visdn_hfc_4s 66052 0 visdn_ec 16988 0 visdn_timer_system 3156 0 visdn_ppp 11112 0 ppp_generic 35157 1 visdn_ppp slhc 7233 1 ppp_generic visdn_streamport 11112 0 kfifo 3328 2 visdn_ec,visdn_streamport visdn_netdev 19176 0 visdn_softcxc 6244 8 visdn_hfc_e1,visdn_hfc_usb,visdn_hfc_pci,visdn_hfc_4s,visdn_ec,visdn_ppp ,visdn_streamport,visdn_netdev visdn_core 55308 14 visdn_hfc_e1,visdn_hfc_usb,visdn_hfc_pci,visdn_hfc_4s,visdn_ec,visdn_tim er_system,visdn_ppp,visdn_streamport,visdn_netdev,visdn_softcxc md5 4033 1 ipv6 235137 14 autofs4 24773 0 i2c_dev 11329 0 i2c_core 22081 1 i2c_dev sunrpc 162725 1 zaptel 206852 0 crc_ccitt 2113 1 zaptel dm_mirror 27825 0 dm_mod 57556 1 dm_mirror button 6481 0 battery 8901 0 ac 4805 0 sk98lin 146217 1 sata_nv 9285 0 ext3 116809 2 jbd 71385 1 ext3 sata_sil 9029 0 libata 56477 2 sata_nv,sata_sil sd_mod 17217 0 scsi_mod 121933 2 libata,sd_mod asterisk1*CLI> show vgsm interfaces era : FAILED NOT_SEARCHING wind : FAILED NOT_SEARCHING vodafone: FAILED NOT_SEARCHING blu : FAILED NOT_SEARCHING asterisk1*CLI>show vgsm interfaces era Device: /dev/vgsm0s0 Context: vgsm_tim_in Rx-gain: 255 Tx-gain: 255 Set clock: yes Module: Status :FAILED Reason: Error configuring CODEC asterisk1*CLI> show visdn interfaces Interface Role Mode TEI Status Calls asterisk1*CLI> visdn_configurator says: D: 000001 E: 000002 Port object st0 not found And i wondered how it should looks vgsm.config,visdn.config and device-pci-0000:01:08:0 for the vGSM card??? Maybe someone had installed this card on Trixbox??? Thanks for any help... emDWAem ---------------------------------------------------------------------- PS. Fajny portal... >>> http://link.interia.pl/f196a _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers _______________________________________________ Visdn-hackers mailing list [email protected] https://mailman.uli.it/mailman/listinfo/visdn-hackers
