I try to put my isdn Desk Link PCI (HFC-S PCI A - PW2BIPPCI30) in NT mode:
usr/local/etc/visdn/device-pci-0000:02:09.0
<netdev visdn0>
protocol lapd
role NT
mode P2MP
</netdev>
<port st0>
attribute role NT
attribute timer_t1 1500
attribute timer_t3 1500
<chan D>
connectmodule netdev visdn0
</chan>
<chan E>
connectmodule netdev visdn0 echo
</chan>
</port>
visdn.conf
[global]
network_role = private
tones_option = yes
language = en
outbound_called_ton = unknown
force_outbound_cli =
force_outbound_cli_ton = no
clir_mode = unrestricted_default
cli_rewriting = No
national_prefix = 0
international_prefix = 00
network_specific_prefix =
subscriber_prefix =
abbreviated_prefix =
overlap_sending = Yes
overlap_receiving = No
autorelease_dlc = 10
call_bumping = No
;nt mode
[visdn0]
network_role = private
context = visdn0_in
tones_option = yes
outbound_called_ton = unknown
force_outbound_cli =
force_outbound_cli_ton = no
clir_mode = unrestricted_default
clip_default_number = 300
clip_numbers = _X.
pbx2*CLI> show visdn interfaces visdn0
pbx2*CLI>
-- visdn0 --
Status : Online
Role : NT
Mode : Point-to-Multipoint
TEI : Dynamic
Network role : Private Network
Context : visdn0_in
Language : en
Transparent Numbers : _X.
Echo canceller : No
Echo canceller taps : 256 (32 ms)
Tones option : Yes
Overlap Sending : Yes
Overlap Receiving : No
Call bumping : No
National prefix : 0
International prefix : 00
Newtork specific prefix :
Subscriber prefix :
Abbreviated prefix :
Autorelease time : 10
Outbound type of number : unknown
Forced CLI :
Forced CLI type of number : unset
CLI rewriting : No
CLIR mode : Unrestricted by default
CLIP enabled : Yes
CLIP override : No
CLIP default : <300>
CLIP special arrangement : No
CLIP Numbers : _X.
DLCs :
T301: 180 T301: 180 T302: 12 T303: 4
T304: 20 T305: 30 T306: 30 T307: 180
T308: 4 T309: 6 T310: 35 T312: 6
T314: 4 T316: 120 T317: 60 T320: 30
T321: 30 T322: 4
Parked calls:
Channels:
B1: AVAILABLE
B2: AVAILABLE
In TE mode card works perfectly...In Nt mode When I try to connect isdn
phone(ascom eurit 133) , i hear nothing (with cross-over isdn cable or not).
As i know in NT mode isdn card provides voltage (38-40V),that's right??
There is no voltage between pins 3,4,5,6...
Maybe my card doesn't have support for NT mode???
My configuration:
Centos 4.3 kernel 2.6.11
visdn-devel-20060704 patch-669
asterisk 1.2.10
in pci slots:
1x DeskLink ISDN PCI (HFC-S PCI A)-PW2BIPPCI30
1x Voismart VGSM
Thanks for your help Matteo (with vGSM card), now vGSM works :))
-----------------------------------------------------------------
Kup sobie Stachursky'ego!!!
Sprawdz >>> http://link.interia.pl/f198f
_______________________________________________
Visdn-hackers mailing list
[email protected]
https://mailman.uli.it/mailman/listinfo/visdn-hackers
