on the HMC select the PCHID of the osa in question, then select on the right side the advanced facilities icon. You have to toggle the menus. I alsways forget the menu where it is. There you will find a menu item where you can set the osa mode. Afterwards you have to config off/on the pchid.
Franz Josef Pohlen ----- Original Message ----- From: "Boyes, Maureen S." <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, October 19, 2005 7:28 PM Subject: [VMESA-L] OSA Question Hello: We are setting up z/VM 5.1's TCP/IP for the first time. We do not want to auto negotiate. We need, according to our network group, to hard code at 100 full duplex. We are running in QDIO mode. How do I set 100 full? We have a z/890. Thanks. Maureen "MFS Relay Service" made the following annotations on 10/19/05 13:28:16 ---------------------------------------------------------------------------- -- This email communication and any attachments may contain proprietary, confidential, or privileged information. If you are not the intended recipient, you are hereby notified that you have received this email in error and that any review, disclosure, dissemination, distribution or copying of it or its contents is prohibited. The sender does not waive confidentiality or any privilege by mistransmission. If you have received this email in error, please notify the sender immediately, delete this email, and destroy all copies and any attachments. ============================================================================ ==
