Yep, I have all of that (or I think so at this time<G>).
I wanted to see who was connected to the vswitch. I know that vswitch
is just a special type of guest lan, so I should have known to look at
the guest lan type commands.
Tom Duerbusch
THD Consulting
I "should" go get a beer, now.
>>> [EMAIL PROTECTED] 10/21/05 2:33 PM >>>
Tom: You need a minimum of one VM TCPIP controller machine. The
controller machine manages the vswitch for availability. The real
devices are attached to the controller at vswitch creation or recovery
to an available controller. The controller does not have DEVICE/LINK
statements, it does not run it as IP adapter. If you want a VM TCPIP
stack to use the vswitch as an IP adaptor you need to give it a NICDEF
and couple it over to the vswitch guest lan (sorry Alan for calling it
a
vswitch guest lan).
So you would then have two VM TCPIP stacks, one as a controller, and
the
other as a user of the vswitch.
Bytes in/out come from a NETSTAT DEVLINK pointing at the name of tcpip
controller:
netstat devlink tcp tcpiplz
VM TCP/IP Netstat Level 510
Device VSWITCHDEV Type: VSWITCH-IUCV Status: Connected
Queue size: 0 CPU: 0 IUCVid: *VSWITCH Priority: B
Link VSWITCHLINK Type: IUCV Net number: 1
BytesIn: 790 BytesOut: 924
or from asking the tcpip stack using an adapter on the guest lan:
netstat devlink tcp tcpiply
VM TCP/IP Netstat Level 510
Device [EMAIL PROTECTED] Type: OSD Status: Ready
Queue size: 0 CPU: 0 Address: 0800 Port name:
UNASSIGNED
IPv4 Router Type: NonRouter Arp Query Support: Yes
Link OSASERV Type: QDIOETHERNET Net number: 0
BytesIn: 427469 BytesOut: 0
Forwarding: Enabled MTU: 1500 IPv6: Disabled
Broadcast Capability: Yes
Multicast Capability: Yes
Group Members
----- -------
224.0.0.1 1
David
Tom Duerbusch wrote:
>I have vswitch running over on the IFL lpar. Still only testing.
>
>Great...neat...
>
>I connected to it via VM's TCP/IP stack.
>I've connected to it via 64 bit SLES9.
>
>Seems to all work.
>
>But now that traffic isn't being routed via the VM TCP/IP stack, the
>information that I was getting from NETSTAT, just isn't there
anymore.
>
>I use to be able to see what was connected to me.
>I use to be able to see the byte count of data that was sent (netstat
>dev).
>
>Just kind of wondering how I can tell when it is being used and what
>kind of and amount of activity that is on it.
>
>Thanks
>
>Tom Duerbusch
>THD Consulting
>
>
>
>
>
