Carl, Your Q DASD ALL shows 505C is not "CP SYSTEM" or "CP OWNED" (ATTACH-ed to SYSTEM); Do CP ATTACH 505C SYSTEM And put LNX032 on a USER_VOLUME statement in 2nd-level VM's SYSTEM CONFIG
-------------------------------------------------------- This e-mail, including any attachments, may be confidential, privileged or otherwise legally protected. It is intended only for the addressee. If you received this e-mail in error or from someone who was not authorized to send it to you, do not disseminate, copy or otherwise use this e-mail or its attachments. Please notify the sender immediately by reply e-mail and delete the e-mail from your system. -----Original Message----- From: VM/ESA and z/VM Discussions [mailto:[EMAIL PROTECTED] On Behalf Of Clark, Carl Sent: Monday, January 23, 2006 1:45 PM To: [email protected] Subject: Re: 3rd level Linux testing, attaching DASD I only changed the system config on the 2nd level VM. SHould I change the host config file too? When logged on the 3rd level linux a q dasd shows this: (505C is the device not reachable) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ q dasd all HCPQVC022E A virtual device number was not supplied or it was invalid. Ready(00022); T=0.01/0.01 13:39:50 q dasd DASD 0190 3390 510RES R/O 107 CYL ON DASD 5060 SUBCHANNEL = 0007 DASD 019D 3390 510W01 R/O 146 CYL ON DASD 5061 SUBCHANNEL = 0008 DASD 019E 3390 510W01 R/O 250 CYL ON DASD 5061 SUBCHANNEL = 0009 DASD 0592 3390 510W01 R/O 67 CYL ON DASD 5061 SUBCHANNEL = 000A Ready; T=0.01/0.01 13:39:53 q 505c HCPQVD040E Device 505C does not exist Ready(00040); T=0.01/0.01 13:40:22 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ When logged on to the 3rd level maint user the q dasd shows this: q dasd DASD 5060 CP OWNED 510RES 42 DASD 5061 CP OWNED 510W01 37 DASD 5062 CP OWNED 510W02 1 DASD 5063 CP OWNED 510SPL 1 DASD 5064 CP OWNED 510PAG 0 Ready; T=0.01/0.01 13:41:50 q dasd all DASD 5060 CP OWNED 510RES 42 DASD 5061 CP OWNED 510W01 37 DASD 5062 CP OWNED 510W02 1 DASD 5063 CP OWNED 510SPL 1 DASD 5064 CP OWNED 510PAG 0 DASD 0190 MNT190 , DASD 0191 VDISKA , DASD 019D MNT19D , DASD 019E MNT19E DASD 505C LNX032 , DASD 5D2D MNTSVC An offline DASD was not found. Ready; T=0.01/0.01 13:41:56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Thanks for your ideas. -----Original Message----- From: VM/ESA and z/VM Discussions [mailto:[EMAIL PROTECTED] Behalf Of Rich Smrcina Sent: Monday, January 23, 2006 1:25 PM To: [email protected] Subject: Re: 3rd level Linux testing, attaching DASD Issue Q DASD, see if it is in the list and check the SYSTEM CONFIG on the second level system. Clark, Carl wrote: > That didn't help. I still receive the same message The vol is available to the 2nd level test before it's IPL, then is available to Operator and Maint users after the IPL. > > Is there a way to determine if this vol was actually added to the User_Volume List? > > -----Original Message----- > From: VM/ESA and z/VM Discussions [mailto:[EMAIL PROTECTED] > Behalf Of Rich Smrcina > Sent: Monday, January 23, 2006 10:57 AM > To: [email protected] > Subject: Re: 3rd level Linux testing, attaching DASD > > > The volume LNX032 has to be available to the second level VM system and > it has to be in the User_Volume list. > > Clark, Carl wrote: >> VM enthusiasts: >> >> Have any of you installed a 3nd level Linux? We are trying to >> install Linux as a guest to a second level z/VM v5.1 test system and the >> current problem is that the 3rd level user (Linux) cannot see the dasd >> device with volser LNX032 as shown in the msg log: >> >> LOGON LNX032 >> HCPLNM108E LNX032 0191 not linked; volid LNX032 not mounted >> HCPLNM108E LNX032 0201 not linked; volid LNX032 not mounted >> HCPLNM108E LNX032 0202 not linked; volid LNX032 not mounted >> NIC 0600 is created; devices 0600-0602 defined >> HCPNDF2787E NIC 0600 not connected; LAN SYSTEM VSW1 does not exist >> z/VM Version 5 Release 1.0, Service Level 0502 (64-bit), >> built on IBM Virtualization Technology >> There is no logmsg data >> FILES: NO RDR, NO PRT, NO PUN >> LOGON AT 10:43:50 EST MONDAY 01/23/06 >> z/VM V5.1.0 2005-12-15 17:26 >> >> >> Your help is appreciated, >> Carl Clark >> BCBST >> >> Please see the following link for the BlueCross BlueShield of Tennessee E-mail >> disclaimer: http://www.bcbst.com/email_disclaimer.shtm > -- Rich Smrcina VM Assist, Inc. Main: (262)392-2026 Cell: (414)491-6001 Ans Service: (360)715-2467 rich.smrcina at vmassist.com Catch the WAVV! http://www.wavv.org WAVV 2006 - Chattanooga, TN - April 7-11, 2006 Please see the following link for the BlueCross BlueShield of Tennessee E-mail disclaimer: http://www.bcbst.com/email_disclaimer.shtm
