Hi listers, I know, it is not the right list here for my problem, but I have put my question also on the flex-es list and got no answer up to now. Probably because there are less members on the list. I hope, that here is perhaps someone who can help me with my problem.
I have got into trouble with the network adapters of my t-server. After I have tested something with the configuration, - and obviously done something wrong - my network adapters (on the mainboard and a dual port pci card) were not usable anymore. I have then deleted all the adapters and wanted to reconfigure them with the scoadmin - Hardware - Networking - networking Configuration Manager - Hardware - Add new LAN adapter. I selected first the "Ethernet Intel PRO/100+(eeE)-PCI-Slot 0 Bus 1 Device 7 Function 0" and pressed Continue, then OK. I got an error message which did not completely fit on the window, but I could read the idbuild command, which was executed. For the error message I entered the idbuild command on a command window again. /etc/conf/bin/idbuild -M eeE -M net0 I got the following messages UX:idbuild: INFO: The following loadable modules will be configured now: \n\t eeE net0\n UX:idmkunix: ERROR: Unknown tunable parameter 'NET0SAPMAXSAPS' UX:idmkunix: ERROR: Unknown tunable parameter 'NET1SAPMAXSAPS' UX:idmkunix: ERROR: Unknown tunable parameter 'NET2SAPMAXSAPS' UX:idmkunix: ERROR: Errors encountered. Configuration terminated. I did the same with the PRO/100+(eeE8) adapter choice but I got the same message. Also the choices for the PCI-Card adapter ports failed. So I have currently no network connection. Can anybody help me, to get my network adapters working again. Thanks in advance Mit freundlichen Grüßen / best regards Franz Josef Pohlen
