Hi Ido,
Whoops, you're right! It was stiffnessweight, which is the analogous of
curvatureweight for levelsets.
Cheers
Luca
On 03/ago/2011, at 09:01, ido yerushalmy <ido.yerusha...@gmail.com> wrote:
> Hi Luca,
> Once again, thanks for the helpful information.
> The example is a good start, however I think the curvatureweight doesn't
> belong to this script.
> I couldn't find it in the parameters list at:
> http://www.vmtk.org/VmtkScripts/vmtkpotentialfit and when I tried to use it I
> got a crash.
>
> Thanks,
> Ido
>
>
> On Wed, Aug 3, 2011 at 2:31 AM, Luca Antiga <luca.ant...@gmail.com> wrote:
> Hi Ido,
> this script takes an image (actually, a feature image, i.e. the output of
> vmtkimagefeatures) and a surface in input,
> and moves the vertices of the surface so that they converge on the minimum of
> the potential defined by the image.
> For instance, you can extract an isosurface from the image and let it
> converge to the ridges of the gradient magnitude
> of the image, like with level sets (this is just one use case, you can of
> course start from any surface, not necessarily
> an isosurface).
> Here is the pipe to do it:
>
> vmtkimagereader -ifile foo.vti --pipe vmtkmarchingcubes -l 200.0 --pipe
> vmtkimagefeatures --pipe vmtkpotentialfit -potentialweight 1 -curvatureweight
> 0.1 -iterations 100 -ofile foo.vtp
>
> Here potentialweight is the analogous of level set advection.
>
> Hope this will get you started.
>
> Luca
>
>
>
> On Jul 31, 2011, at 12:00 PM, ido yerushalmy wrote:
>
>> Hi,
>> I'm having a similar problem and want to try using vmtkpotentialfit.
>> I tried using it the following way:
>>
>> vmtkpotentialfit -imagefile foo.vti -ofile foo_potentialfit.vtk
>>
>> but it seems that the output is empty (no file is created). If I try to view
>> the surface, I see nothing, just a black screen.
>> Does anyone know if there's an example I can follow for this script?
>>
>> Regards,
>> Ido
>>
>> On Fri, Jul 29, 2011 at 11:28 AM, Luca Antiga <luca.ant...@gmail.com> wrote:
>> Hi Yap,
>> if you are on a 64 bit system, and assuming you compiled vmtk from scratch
>> (correct me if I'm wrong)
>> make sure that vmtk and its dependencies are compiled for a 64 bit
>> architecture (amd64 or x86_64).
>> You should find a reference to these two in your CMakeCache.txt in the build
>> directories.
>> If you are running on a 64 bit system, your build should already be 64 bits
>> anyway...
>>
>> In any case, there is a possibility that memory is not sufficient if you are
>> running, for instance, level
>> sets on very large images. Running level sets means that your image has to
>> be replicated several
>> times in memory (to compute gradients, etc), and converted to "expensive"
>> numerical representations,
>> so it's totally possible that you run out of memory.
>>
>> Just so you know, you can for instance segment individual VOIs and merge
>> them after segmentation,
>> or you can work on a subsampled image and then optimize your segmentation on
>> the full image.
>> Or you could rely on less expensive deformable models - an explicit
>> deformable model such as the
>> one provided by vmtkpotentialfit. Or a bit of all the above.
>>
>> What's the right way to go really depends on the problem at hand and what
>> you're trying to achieve.
>>
>> What is the size of your images and what algorithms are you trying to run on
>> them?
>>
>> Luca
>>
>>
>> On Jul 21, 2011, at 9:05 PM, Yap, Choon Hwai wrote:
>>
>> > Hi,
>> >
>> > I would like to segment very high resolution images, and keep encountering
>> > memory error as such:
>> >
>> > ERROR: In /build/buildd/vtk-5.4.2/Common/vtkDataArrayTemplate.txx, line 141
>> > vtkFloatArray (0x1d582b0): Unable to allocate 186212691 elements of size 4
>> > bytes.
>> >
>> > Is there a way to increase the memory allocation for vmtk?
>> > I'm using Ubuntu v11.04
>> >
>> > Any advice will be greatly appreciated..!
>> > Thanks!
>> >
>> > regards,
>> > Yap
>> >
>> > ------------------------------------------------------------------------------
>> > 5 Ways to Improve & Secure Unified Communications
>> > Unified Communications promises greater efficiencies for business. UC can
>> > improve internal communications as well as offer faster, more efficient
>> > ways
>> > to interact with customers and streamline customer service. Learn more!
>> > http://www.accelacomm.com/jaw/sfnl/114/51426253/
>> > _______________________________________________
>> > vmtk-users mailing list
>> > vmtk-users@lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/vmtk-users
>>
>>
>> ------------------------------------------------------------------------------
>> Got Input? Slashdot Needs You.
>> Take our quick survey online. Come on, we don't ask for help often.
>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>> http://p.sf.net/sfu/slashdot-survey
>> _______________________________________________
>> vmtk-users mailing list
>> vmtk-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/vmtk-users
>>
>
>
> ------------------------------------------------------------------------------
> BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
> The must-attend event for mobile developers. Connect with experts.
> Get tools for creating Super Apps. See the latest technologies.
> Sessions, hands-on labs, demos & much more. Register early & save!
> http://p.sf.net/sfu/rim-blackberry-1
> _______________________________________________
> vmtk-users mailing list
> vmtk-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/vmtk-users
------------------------------------------------------------------------------
BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
The must-attend event for mobile developers. Connect with experts.
Get tools for creating Super Apps. See the latest technologies.
Sessions, hands-on labs, demos & much more. Register early & save!
http://p.sf.net/sfu/rim-blackberry-1
_______________________________________________
vmtk-users mailing list
vmtk-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/vmtk-users
