Hi Laurentiu,
you are right, no need for make install. I always forget that...
The fact that you have multiple installations, both binary and source, is
probably not going to help you. I suggest you to uninstall the binary version.
Anyway, if you want to change a script, just go in your source vmtk/vmtkScripts
directory, change the file you need to change, then go to vmtk-build (or
whatever your build directory is named) and run "make".
You should find your modified file in this directory
vmtk-build/Install/lib/vmtk/vmtk/
If you don't see any change when you run the script, it means you still have
the binary version in the way.
Best regards
Luca
On Sep 30, 2011, at 4:18 PM, Lipsa Laurentiu Mihai wrote:
> Hi Luca,
> Finally I had to install a new version of cmake and it works. There
> is some needs to give the 'make install' command? I ask you that because I
> see that after the command 'make' it compile and install all. When I give
> 'make install' or 'sudo make install' it gives me the next:
>
> lau@lau-laptop:~/vmtk-build$ make install
> make: *** No rule to make target `install'. Stop.
>
> Another question is: if I want to change a file from code source of
> VMTK(*.py)/ITK(*.cxx ) or VTK(*.py , *.cxx) where are located? I tried to
> change ( a code file I thing, ex. vmtkactivetubes.py, change the error text
> "image not found") compile again with make and when I run the file with vmtk
> (pypepad), I see that there is no change(in the text). In the
> usr/share/pyshared/vmtk there is another identical file which if i change the
> text(changing file atributes -rw), it's working. Can you tell me which is the
> problem?
>
> Thanks.
> Laurentiu
>
> From: Luca Antiga <luca.ant...@gmail.com>
> To: Lipsa Laurentiu Mihai <lip_...@yahoo.com>
> Cc: "vmtk-users@lists.sourceforge.net list" <vmtk-users@lists.sourceforge.net>
> Sent: Friday, September 30, 2011 12:18 PM
> Subject: Re: [vmtk-users] Installation problem
>
> Hi Laurentiu,
> indeed you probably need at least 2.8.2
> I figure what you have is what the package system got you, in case you can
> always compile it from scratch. It just takes a ./configure + make + make
> install, it's pretty straightforward. Make sure you have ncurses-dev among
> your packages otherwise you won't get the ccmake "gui" once compiled.
> Best regards
>
> Luca
>
>
> On Sep 30, 2011, at 11:15 AM, Lipsa Laurentiu Mihai wrote:
>
>> Hi Luca,
>> It put: "cmake version 2.8.0" . The file wasn't there, probably it's a
>> old version.. I will try to copy the one you sent.
>>
>> Thanks.
>> Laurentiu
>>
>> From: Luca Antiga <luca.ant...@gmail.com>
>> To: Lipsa Laurentiu Mihai <lip_...@yahoo.com>
>> Cc: "vmtk-users@lists.sourceforge.net" <vmtk-users@lists.sourceforge.net>
>> Sent: Friday, September 30, 2011 12:10 PM
>> Subject: Re: [vmtk-users] Installation problem
>>
>> Hi Laurentiu,
>> can you run
>> cmake --version
>> and let me know what's the output?
>>
>> You should have the FindGit.cmake file in some location such as
>> /usr/share/cmake-2.8/Modules/FindGit.cmake
>> (If you don't, I attach it just in case)
>>
>> If it's not there, either your cmake version is not recent enough, or
>> there's some conflict between multiple cmake installations.
>>
>> Hope this helps.
>>
>> Luca
>>
>>
>>
>> On Sep 30, 2011, at 11:00 AM, Lipsa Laurentiu Mihai wrote:
>>
>>> Hi,
>>> I am trying to install Vmtk and i get this error. Git it's
>>> istalled. Which can be the problem?
>>>
>>>
>>> CMake Error at SuperBuild.cmake:28 (find_package):
>>> Could not find module FindGit.cmake or a configuration file for package
>>> Git.
>>>
>>> Adjust CMAKE_MODULE_PATH to find FindGit.cmake or set Git_DIR to the
>>> directory containing a CMake configuration file for Git. The file will
>>> have one of the following names:
>>>
>>> GitConfig.cmake
>>> git-config.cmake
>>>
>>> Call Stack (most recent call first):
>>> CMakeLists.txt:51 (include)
>>>
>>>
>>>
>>> CMake Warning (dev) at
>>> /usr/share/cmake-2.8/Modules/ExternalProject.cmake:160
>>> (message):
>>>
>>>
>>> Best regards,
>>> Laurentiu
>>> ------------------------------------------------------------------------------
>>> All of the data generated in your IT infrastructure is seriously valuable.
>>> Why? It contains a definitive record of application performance, security
>>> threats, fraudulent activity, and more. Splunk takes this data and makes
>>> sense of it. IT sense. And common sense.
>>> http://p.sf.net/sfu/splunk-d2dcopy2_______________________________________________
>>> vmtk-users mailing list
>>> vmtk-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/vmtk-users
>>
>>
>>
>
>
>
------------------------------------------------------------------------------
All of the data generated in your IT infrastructure is seriously valuable.
Why? It contains a definitive record of application performance, security
threats, fraudulent activity, and more. Splunk takes this data and makes
sense of it. IT sense. And common sense.
http://p.sf.net/sfu/splunk-d2dcopy2
_______________________________________________
vmtk-users mailing list
vmtk-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/vmtk-users
