Dear Leong, Yong,
you posted three messages in a short time.
I hope you understand that support on the vmtk mailing list is performed on a
free, voluntary
basis. Today there are several questions that need a reply on the list and I'll
try to address
them as soon as my time allows.
If you need timely responses, please consider purchasing professional support.
Best regards.
Luca
On Feb 22, 2013, at 1:10 PM, Leong Yong Shin wrote:
>
>
> ---------- Forwarded message ----------
> From: Leong Yong Shin <leongyongs...@gmail.com>
> Date: Fri, Feb 22, 2013 at 7:01 PM
> Subject: Centerline Tracing of a loop
> To: vmtk-users@lists.sourceforge.net
>
>
> Dear vmtk-users,
>
> I am using VMTK on 3D slicer and I have encountered a problem. I have a model
> which is a solid straight line with a open loop in the middle.
>
> I wanted to trace the centerline of the loop, however, the VMTK centerline
> module can only trace the centerline of a single branch (of the loop). (FYI:
> the seed and the target fiducials are at both ends of the straight line). I
> have attached an image of my result in the mail for illustration.
>
> What I wish to achieve:
>
> The tracing of the entire loop with a single seed and a single target point.
> The centerline must branch at the bifurcation and rejoin at the opposite end
> of the loop.
>
> Is there anyway to achieve this? Any help is deeply appreciated. Thanks!
>
>
> Take Care!
> Leong Yong Shin
>
>
>
>
>
> --
> Take Care!
> Leong Yong Shin
> School of Chemical & Biomedical Engineering
>
>
> ------------------------------------------------------------------------------
> Everyone hates slow websites. So do we.
> Make your web apps faster with AppDynamics
> Download AppDynamics Lite for free today:
> http://p.sf.net/sfu/appdyn_d2d_feb_______________________________________________
> vmtk-users mailing list
> vmtk-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/vmtk-users
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_feb
_______________________________________________
vmtk-users mailing list
vmtk-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/vmtk-users
