Dear VMTK users, I encounter a situation that when I export the surface to STL format and trying to mesh it with ANSYS ICEM. I cannot define the inlet and outlet as they are incorporated into the wall (the whole thing). Is there anything I should do besides clipping and capping before exporting the surface to STL format?
The second problem is that I had repeated crashing when I try to mesh it with VMTK and this happen whenever I add the boundary layer. The vessel geometry I got is a segment from ICA siphon segment to M2 and it is extracted from Time-of-flight MRA. It does appear to be a bit bumpy in appearance, probably due to its low resolution, so I'm not sure if this could be the problem. Or if I need a very powerful computer to run the VMTK?? Please kindly comment. Thanks, Vincent ------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1 _______________________________________________ vmtk-users mailing list vmtk-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/vmtk-users
