Thanks Alex That is how my setup is, I'll do some searching on how to forward the ports.
Cheers "Alex K. Angelopoulos" wrote: > > Do you have Internet connection sharing set up on the network at home? > > If so, here is how you would do it - I don't recall the exact details for ICS > setup, but this is the "layout". > > Say your dialin PC is on 192.168.0.1, and you have another on 192.168.0.2 > > (1) Set up the dialin PC running ICS so that it forwards traffic on ports 5802 > and 5902 to 192.168.0.2 > > (2) On 192.168.0.2, set it to use Display 2. > > (3) you can now connect from over the link. make sure you use Display 2 in > VNCViewer; if you are using the Java applet, go to port :5802 instead of :5800. > > ----- Original Message ----- > From: "Kevin Gleeson" <[EMAIL PROTECTED]> > To: "vnc" <[EMAIL PROTECTED]> > Sent: Saturday, 2002-05-25 20:45 > Subject: [VNC] VNC into network other than gateway machine > > > Hi guys > > > > Wondering how I can VNC into home from work to a machine that isn't > > attached directly to the net. > > > > I can VNC to my machine that has the modem attached but can't get to any > > other machines on the home network. How do I go deeper into the network? > > I have given the other machine different ID numbers but that doesn't > > work. > > > > At the momemnt I VNC to the current IP address of my "server" machine, > > then a colon then the ID number. How do I define the additional IP > > address of the other computers? All machines at both ends are running > > Win2KPro > > > > Going the other way, my work connection to the internet is via an ADSL > > connection. I would like to get to my machine on this network as well, > > but it is even harder as the IP address would be drifting here, and > > there is no website to route through (at home I run Viking server with > > DynIP and leave a fulltime modem connection online(no adsl service to > > home yet)). Even if I can work out how to get further into the network, > > how do I get into the office network without knowing what the IP address > > of the ADSL router is at the time? > > > > Thanks in advance > > > > -- > > Kevin Gleeson > > Imagine It - 3D animation and graphics > > Halfmoon Bay, Tasmania, Australia > > 61 3 6239 9140 > > http://www.imagine-it.com.au > > > > aus.motorcycles bike page > > http://www.imagine-it.com.au/ausmoto > > http://www.egroups.com/group/tasride > > _______________________________________________ > > VNC-List mailing list > > [EMAIL PROTECTED] > > http://www.realvnc.com/mailman/listinfo/vnc-list > > _______________________________________________ > VNC-List mailing list > [EMAIL PROTECTED] > http://www.realvnc.com/mailman/listinfo/vnc-list -- Kevin Gleeson Imagine It - 3D animation and graphics Halfmoon Bay, Tasmania, Australia 61 3 6239 9140 http://www.imagine-it.com.au aus.motorcycles bike page http://www.imagine-it.com.au/ausmoto http://www.egroups.com/group/tasride _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
