Greetings. Just a note, and then I will answer your questions below. Since I started posting this thread, I have learned a couple of things.
1. My co-worker, when given my VNC password, is able to connect to my work machine (W) from his home machine (S2) without a problem, using the same setup I have EXCEPT that he uses Win2000 on the client, not Win98. 2. Win98 telnet may not accept a port argument, so all telnet tests may be invalid. Message: 15 From: "Alex K. Angelopoulos" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Subject: Re: Telnetting to B and W Date: Sun, 2 Jun 2002 16:29:37 -0500 Reply-To: [EMAIL PROTECTED] Do you have a firewall in place at your office that might be blocking all telnet packets? -- No. Once I am in on the VPN, I can telnet anywhere that I want. Normally you would see something like "RFB 003.003" when connecting to an open VNC port with a telnet client. -- This is what my coworker sees when he tries it. See "invalid telnet", above. Let's back up to the beginning of things and see if we can establish what is going on... it will take a few exchanges to get it done, but it will likely be the fastest way to do it, and will help make sure you know exactly what is going on with your VNC access. Could you verify the following for me? I am including some notes from prior email, since I want to keep this info together for reference. 1 - There is a VPN in place at your work; things work fine if you access the network via the VPN. -- Yes, there is a VPN. However, this whole time, I have been accessing the network via VPN, so no, things do not work fine. 2 - You don't use the VPN over your connection. -- Yes, I do. 3 - For some reason, your VPN works only over dialup; it won't accept through-internet connections. -- Incorrect. I connect to the VPN just fine using my DSL connection 4 - You can access B through the Internet, but not W. -- Again, I use the VPN. Through the VPN, I can VNC to B just fine, but I only get "Initial Screen Loading" when I try to VNC to W. 5 - This is an item you will need to probably check at work (actually a question). Does your firewall/router redirect traffic coming in on port 5903 to the internal IP address that W uses? -- I do not believe so. As I stated before I answered these, I now know that a co-worker on a Win2000 machine is able to access ALL machines on our network with no problem. I appreciate your time and effort, and I wish that I could reward it with a successful VNC session. Thanks, Jonathan _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
