Hi there! I know that this topic has been discussed several times but I still have a lot of questions as I am not that familiar with network configuration. So perhaps you can give me some hints. I want to establish a remote access connection from computer A to computer B. Our configuration is as follows (see also attached file): In Office 1 Computer A (with the VNC Viewer and an assigned IP-Adess 192.168.10.xxx) is connected to another computer via a Switchbox. This other computer (also with a is running a ProxyPlus-Server and connects to the internet via ISDN-Modem.The IP-Adress for InternetConnection is assigned dynamically The Proxy-Server is not specially configured, just standard-installation was made and it works. In Office 2 Computer B (with the VNC Server and an assigned IP-Adresse 192.168.10.yyy) is connected to another computer via two hubs. This other computer is NOT running a ProxyServer and connects to the internet via an analogue modem. The IP-Adress for InternetConnection is assigned dynamically. So, the way from A to B is: Computer A -> SwitchBox -> Computer (with ProxyPlus,ISDN-Modem) -> INTERNET -> Computer (with analogue modem) -> Hub -> Hub -> Computer B (with VNC Server). Now, is it possible to connect from computer A to computer B using VNC???
Regards Stefan Giese ------------------------------------------------------- Dipl.-Geogr. Stefan Giese Brechtefeld Seeger + Partner GmbH Arndtstr. 49 49078 Osnabr|ck Tel.: 0541-40 699 16 [demime 0.99c.8 removed an attachment of type application/octet-stream which had a name of config.jpg] _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
