----- Original Message ----- From: "Jay More" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 09, 2002 2:15 PM Subject: NT4server with two network cards (internet/lan) : not working
> Hello, > > I use a NT4 Server computer as a gateway beetween my LAN and the > internet (with a cable-modem connection). The computer have two > network cards. One is set in DHCP client mode and is connected > to the cable modem (i use DynDns to have a dynamic host name), and > the other cards is connected to the LAN with a fixed IP adress. > I run WinRoute-Lite gateway program on this server to connect the > LAN computer's to the internet. > I have installed WinVNC 3.3.4 on this server, and the I only want > to control this server by the internet (with the dyndns host name), > and it doesn't work. The WinVNC Client (started from the internet) do > not connect to the server, and the Web Client do not work. > Is there a way to force WinVNC to "listen" to a specific network cards ? > Is there a problem with WinRoute ? Does WinRoute do NAT? If it is similar to Windows build in Internet Connection Sharing, you will need to find out how to forward ports to a machine on the inside network. By default most NAT's drop unrequested incoming connections. -- William Hooper Hell was full, so I came back ! _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
