hello, please tell me EXACTLY how to do. here are my experiences until now:
i installed the VNC controls on both machines and added the system extension. how should i configure the TCP/IP control panel of each computer in order to make a connection posible? the iMac (that i want to be a server) tells me that my IP is 0.0.0.0 (= no IP?) and doesn't store any changes except the display name. when i try to establish a connection, i start the VNC server in the iMac and the VNC viewer on the G4. the viewer tells me the following errors - Notifier: T_OPENCOMPLETE result -3264 - Connection Listener Dies. You might want to restart the viewer - Notifier: T_OPENCOMPLETE result -3205 - Flash Listener Dies. You might want to restart the viewer and then locks up at once. sometimes the iMac locks up some seconds later. and sometimes a "blocking error" or something like this. i don't remember exactly and didn't memorize how to make this error come up. :] (who memorizes errors?) i tried the following settings in the TCP/IP panel: 1. Connection: Ethernet Config method: manual IP-Address: 1.1.1.1 part net mask: 255.255.255.255 router address: [ ] (nothing) name server address: [ ] (nothing) domain name: [ ] (nothing) (i'm not a professional as you can see, just a try. the words may be different, i use ther german OS 9.1 / 9.2) 2. Connection: Ethernet Config method: BootP server IP-Address: < given by server > part net mask: < given by server > router address: < given by server > name server address: < given by server > domain name: [ ] (nothing) 3. Connection: Ethernet Config method: DHCP server DHCP Client ID: iMac IP-Address: < given by server > part net mask: < given by server > router address: < given by server > name server address: < given by server > domain name: [ ] (nothing) 4. Connection: Ethernet Config method: RARP server IP-Address: < given by server > part net mask: [ ] (nothing) router address: [ ] (nothing) name server address: [ ] (nothing) domain name: [ ] (nothing) 5. Connection: AppleTalk (Mac IP) Config method: MacIP server MacIP server zone: < actual AppleTalk zone > IP-Address: < given by server > name server address: < given by server > domain name: [ ] (nothing) 6. Connection: AppleTalk (Mac IP) Config method: MacIP manual MacIP server zone: < actual AppleTalk zone > IP-Address: 1.1.1.1 router address: [ ] (nothing) name server address: [ ] (nothing) domain name: [ ] (nothing) as you can see i tried many varities. but as i'm a thumb beginner it just was try and error (with "error in every case :] ). and i have a further question: is it possible to use the VNC over the ethernet-network AND use the remote access (to dial into the www) at the same time? this is what i want to do in the end: use the iMac as a kind of "internet router". please help me using this application. (and excuse my bad english). Tobias Huber www.huberwast.de _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] http://www.realvnc.com/mailman/listinfo/vnc-list
