from: ebau [mailto:[EMAIL PROTECTED] send: donderdag 26 juni 2003 11:45 to: [EMAIL PROTECTED]
Thanks for that tip Vince, I never thought of it like that. The main problem was that I didnt know what ports were open or closed. It wasnt too difficult to open them under ICS and all is working well.. I thank you for your response :)) ebau ----- Original Message ----- > why not use display numbers above 6000? > uses display+5800 and display+5900 > lets say display=2100 (7900 and 8000) > also, in this case you have only one port for the whole system... > easy to remember > ViNCe ----- Original Message ----- > Greetings all, > Have read through the notes and found myself at M$ support looking up the > registry settings to open up the ports closed by M$ ICS. By temporarily > disabling ICS it allowed me to connect with VNC and open up ports as per > documented link below.. > http://support.microsoft.com/default.aspx?scid=kb;en-us;231162 > This worked for VNC as I opened a whole block between 5000-6000 , but now > seems ICS wont share to the local clients. Should I be restricting and > narrower block ports to to 5800-5810 and 5900-5910 ? Have I clashed with > another port between 5000-6000 that has halted the normal ICS sgharing > locally? > Any help would be gratefully appreciated _______________________________________________ VNC-List mailing list [EMAIL PROTECTED] To remove yourself from the list visit: http://www.realvnc.com/mailman/listinfo/vnc-list
